Search Results for Query: *

Hello All! What year models did DC but the 53 block Cummins into production? I am guessing '99,'00,'01 or more? Is it a given that the 53 block will crack & leak or are there examples some of these engines running fine? Thanks, Tom

I am looking at a 2000 3500 with an automatic transmission. I have run a '94 5 speed so I am a little unsure of the transmission in the truck. It is a one owner with 165,000 miles. The owner said that 80% of the miles is from highway driving. The engine is fully stock. What can I...

I have a leak coming from my fuel filter water drain valve. 1. I have replaced the valve and it is still leaking. 2. Where is the "pressure coming from? 3. Precision said the the overflow valve will not cause the buildup w. i the filter. 4. Is this lift pump an issue? 5. Fuel...

Guys! I am very pleased with the additional power I'm getting from the new goodies but I am not so happy with the added trips to the pump. I am watching my foot too. Not trying run the truck any harder than before the changes. Just so I am understanding to mechanincs of the plate... ...

I am looking into moving up to a larger turbo. My '94 3500 has the WH1C turbo. To go to the HX35 or 40 can this change over occur w/o downpipe changes? Can I use the WH1C housing or not? Thanks guys! Tom Pace

I am installing the kit and have a question on the tolerance needed to hold when re-adjusting the nut that holds the springs in place. The initial measurement was 0. 071" . How close do I need to shoot for on re-assembly? My digital Starrett is coming up . 001-. 003 variance. This...

I am installing the kit and have a question on the tolerance needed to hold when re-adjusting the nut that holds the springs in place. The initial measurement was 0. 071" . How close do I need to shoot for on re-assembly? My digital Starrett is coming up . 001-. 003 variance. This...

I have been riding a year now with the ABS & Brake light burning. The truck brakes OK but every now and then pedal goes to the floor. The searches on ABS/Brake light don't give much info on the fix. Unhook wires and re-install... etc When the vac pump fails is it a complete failure or...

Hello All! I have removed the transmission & transfer case as one unit. It worked nice, jack placement is important. I have a SMALL leak on the rear seal and everyone says replace it! I called Cummins Atlantic and the service guy said the speedy sleeve is not used any more. My...

Guys, I am about to install my SBC Con OFE . It appears possible to remove both the transmission & transfer case together rather than breaking them apart. I bought a transmission jack from Northern and it looks like it will work great. Your opinions are appreciated! Thanks, Tom

Hello All, I have sent this question out to two individuals so I thought I would try everyone too. I have ordered a Southbend MU 13-1. 25 Con OFE to go in my '94 3500 5 speed 4WD I am planning on doing the clutch job using a friends transmission jack. Questions: 1. Does the gear...

Hello All! My '94/ 5 speed is stock outside of a 4" exhaust and K&N filter so the cam plate and GSK seem to be direction to go along with a gauge package of course. My question is there are several companies who have cam plates as well as springs kits. I am unsure if they are just...

Hello Guys! My front seal is leaking badly. I would like to know what parts I need to make this repair. Does Cummins have a sleeve to cover the groove in the shaft? Thank! TFP

Hello Guys! This truck has 188,000 miles on it and has always been quick to start. Well until now... I have read previous threads about lift pumps, heaters grids, broken hoses. To get it to start in the morning I have to pump the peddle several times before it fires. Once it it warm...

Seasons Greetings Everyone! I just replaced the starter contacts go the second time. With 185,000 miles I guess this is fair but I am curious as to what some fellow CTD drivers are getting out of their trucks? I did use the Foster contacts and expect the increased surface area to help...

Hello, I have a oil leak coming from the front seal aroung the crankshaft. Second, how much trouble is this to fix? Do i have remove the radiator or not? I have let this go for too long! Thanks for all your help! I am quickly becoming hooked on TDR! Tom Pace

Hello Guys, This truck has 180,000 miles on it and all I've done to it is add a Janetty 4" exhaust system to it. I do have a K&N air filter. This truck is used for pulling fifth wheel trailers, 22,000-27,000 lbs. As you can imagine I have had to make do with the 175 hp for 8 years...