Search Results for Query: *

Not asking for help or advice, just need to rant for a second. I just had a new starter/flywheel installed 21 Jul... . my new starter is already toast. It started the truck 3 times and is now shot. Truck is back in the shop again, had to pop the clutch to get it started so I could get it down to...

I recently installed a new Southbend clutch (CON OFE), along with their flywheel, did the job about 2 months ago, give or take. While out in Surprise AZ looking for a home to purchase, my starter began acting up and making an odd racket/not engaging. After getting the truck started and making my...

I need some help. I have a new Optix EGT gauge, and I need to locate a wire off of the ignition that has constant power once the ignition is turned to the ACC or Start position. I know the colors of the wires change fairly often as they build these trucks, mine is an 04½ built in March of 2004...

Finally got it in, It's been sitting in a box in my garage for almost a year. Thats what happens when you get newborn twins. Anyway, the install went extremely well, no hiccups. I won't go as far as to say it was easy, because it wasn't. It's a minimum 2 men with mechanical ability job, 3 is...

Fellas, My Pricol pyro gauge just broke on me. The center white dot that is glued/stuck to the inside of the glass fell off and is lodged against the indicator needle which inturn won't allow the needle to give a reading. I bought it from Geno's about 4 years ago. Does anyone know what the...

http://http://www.allpar.com/model/ram/2010-HD.html All credit to Allpar and Dodge

Apparently I'm doing something wrong. I've tried everything, followed directions on mads site to a T, still nothing will work. I did a search and followed all the suggestions... . nothing. I can get as far as the part where it says to type in C:\D2XX Drivers and click Next, and it's no good...

Folks, have a small problem... not really a problem as much as an irritation. Both of my mirrors (Heated Trailer Tow) shake and vibrate when driving so bad that you can hardly make out what your looking at. It's not the black plastic body, it's the actual glass that's loose. Has anyone ever had...

Fellas, I hope someone here can point me in the right direction. I have a 27' Haulmark cargo trailer that I'm going to pull down the ALCAN in about 6 weeks. Come to find out, the interior lights will not work when the electrical connection (7 pin) is connected to my truck. When I connect it to...

491 hours on engine, 25k miles, 6k on sampled oil, most of that towing 10k fiver. Here's the results: Iron 108 Chromium 3 Lead 3 Copper 13 Tin 0 Aluminum 10 Nickel 0 Silver 3 Silicon 7 Boron 13 Sodium 3 Magnesium 20 Calcium 3493 Barium 0 Phosphorous...

And of course it went out when it was 39 degrees outside. Here's what's going on: Blower motor will kick on and run like normal, ignitor will light off and heat will blow for about 10 seconds, then motor sounds like it reall takes a load and pops the fuse... 15 amp. Overall time that it...

Not sure if this should be in a different forum, if it is I'm sure it will be moved. But in the mean time, go over to this link and click on the video named "Hookin". The mighty DC lets the Furd have it... enjoy. Here's the link Bert

Has anyone seen this yet??? Click Here

Found this on their website as I was ordering up some oil. Must have came out in the last couple weeks as I haven't seen it before. My apologies if this has been covered but I couldn't find anything when I searched. Amsoil Synchromesh

I just ran into an old friend that I havent seen in about a year, he has an 04 F-350 CC LB 4x4 with the 6. 0 and Automatic. He was telling me he had to bring it in for 2 different recalls for the trans, and the worst part is that after the second transmission reflash he had no tow/haul function. We're...

Does anyone have any info on a stainless steel bug deflector that mounts between the grill and the hood? I have been looking for one for quite some time, but all I can find are the ones that mount to the grill itself and cover up the top bar. There used to be a company called PCI that made...

Does anybody have any tricks or experience removing the drivers door panel? Reason I need to do this is there is a horrible vibration that has slowly gotten worse. I've isolated it to the area under the housing that holds the window/lock switches. All other doors are fine, but any bumps in the...

I'm wondering what the thread count is on the shift knob of the 6 speed. It's very close to 3/8"-16, but not quite. It's obviously metric, but I don't have any metric dies to spin on, only have standard. Anybody know for sure?? Thanks Bert

My question is about how long the engine cranks sometimes. Once in awhile it'll fire off almost instantaneously, sometimes it'll crank for a full 3 seconds. My buddies '98 12 valve fires so fast he barely touches the key. Does this have to do with electronics, crank position, rail pressure, all...

Just finished driving the ALCAN Highway from Wisconsin up here to Anchorage, see sig for truck and trailer details. Here's what my findings were: Truck and Trailer GVW -- 17,660 lbs. (transfer station scales) Total Miles -- 3586 Fuel Burned -- 311 gallons Overall MPG -- 11. 53 I can't...