Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
TDR Magazine subscribers receive more than the magazine! You also gain additional forum privileges!
Details here: TDR Privileges
Subscribe to TDR Magazine here: https://www.tdr-online.com/
Attention: TDR Forum Junkies To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.
Two questions:
1. what is the size of the hole that needs to be cut out on winter front. Truck got stolen and they took the one that I had that fit in front of radiator. Have material to make a new one but cannot find any info on size of cutout.
2. they took the tailgate dampner and cannot find...
Need help. Engine light came on a few days ago. Here's what I've done so far to try and clear. Turned key on/off and it showed a companion code 1693 but no other code. I attached OBD scanned and it shows no code so there was no way to delete. I disconnected both batteries and re attached to try...
Truck was stolen and recovered. Took rolltop and tools and cleaned out under rear seat. One of the things taken was the spare tire removal kit to lower spare. All the kits that I can find don't list 2001 ram 2500. What is part number and where can I buy one. Even Mopar Direct doesn't have one...
On way home yesterday abs and break lite came on. Speedometer went to zero. Have PacBreak and Ats commander which didn't work. I finally got an engine light which gave me a P0500 and P0501 (vehicle speed not detected). Would explain why no lock up as Ats commander is set for 32 mph and no lockup...
I have now confused myself. I need to see a picture of the lines going to my 241hd transfer case on 2001, 2500. It looks like a rubber connection has rotted and I now can't remember how or where it goes. I need either a diagram or photo (hopefully better than the ones I took) of where lines go...
Currently in Chula Vista, CA campground and when we came off road it smelled like fuel. Fluid is clear. I got under hood and looked to see where it was coming from. Appears to be dripping from under battery box and only when truck is running. Isn't there a reservoir for vacuum pump under there...
What size bolts are the ones on that mount steering box to frame. I think they are 12, but can't seem to match up with dim.s shown on charts. I replaced a steering box and the "new" one leaked at pitman seal. The guy I bought it from sent me another one and I took everything apart, leaking box...
I've had a Pac Break installed for quite a few years without any problems. While on vacation I had some work done on the truck in WY and break no longer engaged. Looked for pulled vac line to no avail. Drove back to Cali w/o and realized why I bought one in the first place. Once home I rechecked...
Need reference of a good shop in Las Vegas, NV. Have two problems. First is fueling. Truck runs good for days and then starts hesitation. Today it really got worst. We are on a trip and tried to limp home. I think it might be something in tank, but ??? It seems to really go bad climbing hill...
Need help. Have a friend that just changed out his VP and screwed up his keyway. The keyway number is 046. Local Dodge dealer has new keyways but have something like 21 different ones. The parts guy says that the 3 digit number isn't something he can match up??????? Is there somewhere I can get...
rats, someone was finally in chat and i tried to get on to no avail. all i got was the instruction page. i checked cookies and such and they were allowed. what is it that i'm doing wrong??
this is funny:
AN ACTUAL CRAIG'S LIST PERSONALS AD
To the Guy Who Tried to Mug Me in Downtown Savannah night before last.
Date: 2009-05-27, 1 :43 a. m. E. S. T.
I was the guy wearing the blackBurberry jacket that you demanded that I hand over, shortly after you pulled the knife...
It seems that there is a proposal from the Canadian Council of Motor Transportation Administrators (CCMTA) to develop regulation of raised vehicles. There must be some existing regulations as there are requests from various groups to clarify. Under a proposed policy all aftermarket raised...
Some of you might know about this, but most won't. There is a move afoot to close 9 million acres in Utah to ALL off road vehicles and mountain bikes. The bill, introduced by U. S. Rep. Maurice Hinchey of New York, would ban motorized recreation on 9. 4 million acres of public land in Utah by...
Here is a sample of Mobile 1300 super 15w40 cj oil. The cj oil is on sample 11 and has 7000 miles on it, with about 90% of it doing towing of 5er and enclosed car hauler. I just switched from synthetic which are all previous samples using Amsoil HDD 15w40. You'll note that there are some...
Still a lot of talk on these lately. I've never seen the inside of one and was curious as to what craps out. I was surprised to see there is not much to "wear" from a mechanical point. The electric motor, brushes, etc. aren't something that wears out in mileage we see these crapping out. The one...
Here's a tip for some of you that are still running your stock intercooler boots and run above stock boost. When do you think they will let go? 1) When its a nice 60 degree out and the truck is close to driveway and tools? 2) When its 118 out, your on the second day of a 5 week trip pulling your...
The dash is cracking from the screw near the windshield on the passenger side of my '01. In looking at it, it looks like its a seperate piece from the lower piece. I did a search and it looks like its called an Upper Pad, but I can't get to a part number. Am I correct that its an upper pad. Can...
I had a Pacbreak installed a few months ago. It works great towing. Today the weather was nice enough to have the windows down and I heard an underhood noise. The best I can explain is when the exhaust break is engaged it sounds like a plugged hand vacume hose (I assume this is normal from...
Fuel tank is leaking at the rollover valve. Not sure if its the rollover valve or the grommet. I went to the dealer and ordered parts, and these are the p/n's that I got:
Rollover Valve p/n 52127666
Rollover Valve grommet p/n 4616244
Something is wrong with one of these numbers as the...