Search Results for Query: *

  • Users: DennyDay
  • Content: Threads
  • Order by date
Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff
  1. DennyDay

    MaxBrake failure

    I have used my MaxBrake on my '06 with many trouble free miles. No IThink I have a problem the trailer brakes don't work, kinda' suddenly. I've got to be back on the road to Texas next week, and I don't want to change controller on the way. When these things fail is it overnight or do they get...
  2. DennyDay

    19.5 or 20" wheels for 06 4x4

    General question - - Has anyone had any experience with either 19.5 or 20 inch wheels, single wheel, with load range G tires on a 2006 4x4 with a 2" lift. Kinda close to max load on drive tire tires with 17 tires in load rang D. Any experienced help would be appreciated.
  3. DennyDay

    3500 Wheels in Texas

    Looking for a set of 7. 17 inch steel wheels for a 2006 3500 dually in Texas. Need to be in good shape, with no rust. Thanks, Denny
  4. DennyDay

    Dually Conversion, 06 4X4

    As anyone ad experience. Converting a 2500 to dual wheels? Have an 06 2500 Megaccab 4X4 with Spyntech hubs on the front and am not sure if the front wheel Dually wheel adapters. Will fit over the Spyntech front hubs.If any one knowsI sure would appreciate an answer. I I planning on using an...
  5. DennyDay

    Trailer Turn signal Problem

    Finally came up with a problem - - -I think it comes with the TMPS (Spelling) My left trailer turn signal stopped working, usually simple a simple fix, I put a new bulb in and it still doesn't work. Pulled the plug and checked the socket and the only lead that worked was the hot feed - - no...
  6. DennyDay

    2nd Gen Non-Engine/Transmission 01 Fast Idle

    My old truck is an 01 diesel automatic that has been in my Sons and Grandsons hands for 5 years and some of the paperwork is lost, I tried to use the fast idle switch yesterday and it doesn't work. I think it was made by the same people that make the Britebox and I can't find any paperwork on...
  7. DennyDay

    Ambient Temp Sensor

    The overhead temp readout has a new trick - when I started the truck this AM reading was -40 degrees, well it's a little cold here in south Texas, but not that cold - does any one know the location of the sensor on an 06 Mega cab - - never had a problem with it before, thought if I could warm...
  8. DennyDay

    Dodge Ram Recall

    Just caught something on the news about a recall - - something about steering problems - - anybody know details such as years could it be uncontrolled steering? Been around for so many years/
  9. DennyDay

    Newest member of the DUMB A--ED Club

    Just came out of Home Depot with a basket full of junk, my wife unloaded in to be back of the truck, after I carefully unlocked the toper rear door with the key, while my wife took the cart to the rack, I jumped into the cab and started the truck, WELL it was a good plan! the truck cranked an...
  10. DennyDay

    06 Transfer Case Question

    I've got an 06 Megacab 4x4 with an electric switch on the dash to control the 4WD- question is can I change over to a leaver operated system with out a major problem? The reason I want to do this is with my SpynTech system, I have to work it back and forth to get in and out of low range, won't...
  11. DennyDay

    Cummins Vacume Compressor died 10K miles

    Cummins Vacuum Compressor died 100K miles Looking for suggestions! Should I replace the vacuum pump from Cummins for the Jake Brake (big $$$) or go to another make such as the one that uses compressed air to operate? Would have thought I would have gotten more years out of the Cummins part...
  12. DennyDay

    Keep it mine - - switch

    Please give me a couple of ideas of where to wire a simple on/off switch to try to keep my 06 Megacab in the Day family - - we are going to spend some time on the east Coast - - where vehicle theft is a major past time - - really don't want to spent a lot of time or $$ but something simple and...
  13. DennyDay

    180 vs. 190 Thermo REVISIT

    I posted last week that I had replaced my 190 degree thermostat with a 180 degree in error - - several members pointed out that the origional was a 190 degree and I wouldn't be happy with the 180 degree - - - boy were they right on the money - - - lost 4 mpg the first run out of the box - -...
  14. DennyDay

    180 vrs. 190 Thermostat

    Just recieved some parts from a supplier, (Hoses, thermostst,ect. ) and didn't check them but they sent a 180 degree thermo, didn't even know there was one made, Temp is down quite on the gage from what I'm used to. Will I create any problems using the 180 instead of a 190.
  15. DennyDay

    New SpynTec Hub Kit

    The new narrower SpynTec Kit is out - - about 2. 5" narrower than the origional one
  16. DennyDay

    Parking Brake Adjustment

    Just discovered my parking brake doesn't hold, Any suggestions for adjusting? It is an '06 w/disk brakes and has a small drum at each rear wheel. I've replaced the disc pads on the rear but nerver had to do the emergency brake. I have 110k miles on the truck.
  17. DennyDay

    06 Check-up

    Taking my '06 2500 to R & R Diesel in Akron, Ohio tomorrow for a checkup. Going to have the valves set and have sensors checked, a new belt installed. I've got 95,k miles on it - - - I there any thing I should have them checked. B&B is an independant Cummins Shop that I've used in the past...
  18. DennyDay

    Adult Truths

    1. Sometimes I'll look down at my watch 3 consecutive times and still not know what time it is. 2. Nothing sucks more than that moment during an argument when you realize you're wrong. 3. I totally take back all those times I didn't want to nap when I was younger. 4. There is...
  19. DennyDay

    Fallen Military

    Flags for Fallen Military Guys - - Just came across this after seeing a news item about them on TV tonight. This group (they been around since 2006) donate and install flag poles in honor of fallen military members in places designated or requested by their family members. The one on TV this...
  20. DennyDay

    Who is Going - - -

    to the TDR Event - - - at Cummins in Columbus, Indaina in June?
Back
Top