Search Results for Query: *

I'm working on a NICE 1993 D250 2wd Cummins powered pickup. The front brakes are ready for replacement and the rotors have some wear on them. Truck has 224,000 miles so I doubt that the rotors are the originals. Here is my question: Does the replacement front brake rotors come with the hub and...

An elder friend of mine just brought his 1993 first gen 2wd by saying that the wipers don't work. I had him turn on the ignition and turn the wipers on. The motor works but the wipers don't reciprocate. I grabbed the left wiper arm and moved it across the windshield with the wiper motor turned...

I have a 2015 Fox mountain 235RLS with 6 lug axles. I just replaced the original tires with Goodyear Endurance tires, made in the USA. The spare is a Goodyear and never been on the ground. My trailer parks in a barn when not in use and the spare is covered. It's 9 years old but as I said, never...

I did a coolant change on my 2007, 5.9. I carefully removed the plug at the bottom of the radiator and let it drain. I quickly flushed the radiator and put the radiator plug back in. I proceeded to refill the radiator with Mopar concentrate and added about 3 gallons. I thought I should add some...

I am selling my Southbend clutch, a 1947 OKHD that was just removed from my truck, February 2, 2024. It came out of my 2007, 5.9, G56 truck. I have had 6 surgeries on my left knee and it was just a bit too stiff on the clutch pedal for me.There is .080" of meat on the clutch disc facing on both...

I am going to do another clutch in my 2007, 5.9, G-56. Does anyone have the bearing number for the pilot bearing? I am looking for the number stamped on the bearing, not the Mopar/Dodge part number. I come up with bearing number 1635-2RS. I want to be able to pick my own bearing to make sure it...

I am due for a coolant change on my 2007, 5.9. I want something with at least 5 year to 10 year life coolant. I have used the red Mopar coolant concentrate before.

At 117,000 mile service, I noticed my rear differential is seeping at the pinion. I have the big AAM rear differential. I believe it is the 11.5 inch. I am going to have a trans and axle shop replace it for me. Anything to look out for or to tell the mechanic? He is a friend of mine. Also, Do I...

I run a Smarty jr on my 2007, 5.9. I run it on the 70 hp setting. Did Smarty measure HP at the rear wheels or at the crankshaft? What about South Bend Clutch, Clutch rated for RWHP or crankshaft?

I looked under my truck the other day and saw what looked like trans oil leaking from up top of my G-56. I had bought a good thick replacement Orange boot and put it on. Since my original one was from the factory, I looked for a Mercedes part number and found A 971 267 01 96 on the old boot. I...

My trans is seeping from the top. Someone posted a CV boot kit from NAPA that fit real nice. I searched and couldn't find it. Anyone have the link?

The title says it, How do I find all topics I started? I am looking for a topic I started on a throw out bearing. I don't see anywhere you can just look up topics you started. Any help much appreciated.

The drivers side, positive battery cable on my 2007, 2500, 5.9, G56 is getting bad. I want to shop around online for a new one. Does anyone have the part number? All of the part manuals I downloaded off of the web don't cover diesels.

I am doing a valve adjustment on a 2006, 5.9. I don't want to break the locks or the lug on the injector plug that goes on to the valve cover gasket. How do I unlock them? Factory shop manual says to just remove them. Thanks

My third brake light on my 2007 needs a new bulb. I took the screws out and tried to pull it straight out and it didn't want to move much. I looked and it seems the seal is stuck to the body finish. I have been waiting to change the bulb until I buy a new gasket. Is there a trick to remove the...

My 2007, 5.9 was built when Daimler Chrysler were the Operatives. I can't tell you how many have owned the Dodge name since. But now, Fiat has merged with the French auto maker, PEUGEOT! 52 billion Dollar merger! The new company is called "Stellantis" What's this "Truck" coming to?

I searched before posting but I couldn't get a satisfactory answer. At 113,000 mi, my stock "Y" steering rods has a bad ball joint on it. SYNERGY is back ordered. My friend works for them in San Luis Obispo, ca. So what is the best replacement? Most seem to say, Stay with the "Y" type.

Does anyone know any added HP specs with the BBI .1 injector? My truck has a G-56 so I cannot go big on injectors. I currently have 113,000 miles on stock injectors. I have the Glacier Diesel secondary filter. Kind of a broad question but how long of life can I expect out of my stock, original set?

Working on a friends 2006 doing the full A/C overhaul. I called the source that I bought the HALLA compressors from for my 2007 and he doesn't sell them anymore. I bought a spare and put it on the shelf several years ago. There is A LOT of websites that advertise they have the GENUINE Halla...

Rebuilding an A/C system in a 2006 2500. Replacing the compressor, receiver drier, orifice tube, condenser and flush the evaporator and lines. I look up the condenser and see where some fit "Vin # L" or says "With plastic tank inner-cooler. This 2006 has a build date of 5/2006 with a vin number...