Here I am

Search Results for Query: *

  • Users: paniolo
  • Content: Threads
  • Order by date
Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff
  1. P

    Engine/Transmission (1998.5 - 2002) hard acceleration, motor dies

    after a hard accelaration, if i let off the gas suddenly the motor will die. won't restart unless i crack and bleed the injector lines. i got stock and bd pusher pump with good pressure 20 at wot. is the problem air in the line? would i be better off with an airdog?
  2. P

    Engine/Transmission (1998.5 - 2002) pre-tapped ports triple piece exhaust manifold

    Not sure if I got BD, ATS or other. But kinda sure there the same. Any way mine has two. Are they both 1/4 or is one 1/8? Its hard to tell right now cuz the manifold is upside down with the twin set up. And it's real HOT!
  3. P

    Engine/Transmission (1998.5 - 2002) No power after startup

    Aloha! I got a 02 6spd, twins, comp box, injectors, intake, exhaust, inline exhaust brake, aux. fuel pump. Its a on and off thing. After startup upon acceleration there is no power. Seems to just bog down big time. After a min. its full power no problem. Any ideas? Thanks
  4. P

    Engine/Transmission (1998.5 - 2002) Engine died would'nt restart

    Did a hard run came to a fast stop, motor sputtered and cut off. Would'nt restart. Cranked fine 15psi. fuel pressure. After bleeding the fuel lines at the injectors motor fired back up runs fine. Second time this happened. Edge comp, 90 hp injectors, air and exhaust, hybrid turbo. Any ideas of...
  5. P

    Engine/Transmission (1998.5 - 2002) AFE pre filter

    Installed reflashed Edge Comp Box and a AFE pre-filter at the same time. Got HIGH EGT's now. Not sure which iz da culprit?
  6. P

    Engine/Transmission (1998.5 - 2002) Edge Comp box

    I've been running da Comp box for some time. Didn't realize how much power the box produces. :--) Recently mine had some issues. Sent it to EDGE, they checked it out and even updated it for me. Let me tell you the days without it my truck ran like a dog. Since I got a hybrid turbo and bigger...
  7. P

    Engine/Transmission (1998.5 - 2002) Westach fuel pressure gauge

    Gauge worked fine for months. Now all of sudden reads below 0 psi. (pegged). Has to be the gauge. No codes, starts fine, no loss of power etc. Plus when I switched the power source to non ignition the needle drops below 0 psi. Short or sending unit problem? Anyone with similar problem or...
  8. P

    battery hold down

    Checked out da May Madness. Seen some awesome trucks. Venders were cool. Anyone know where to get them battery hold down with the rams head?
  9. P

    Engine/Transmission (1998.5 - 2002) lift pump, Factory,Cummins,Dealer, same as new Carter replacement?

    Mechanic says the new Carter replacement is jus as good as those higher priced after market set ups. Any feedback.
  10. P

    2nd Gen Non-Engine/Transmission GENO'S Fleetguard oil sampling kit

    Jus for s___'s an grins. I ordered one. Got da results back. Says data indicates no abnormal findings. Resample at normal interval. Test report with mumbo jumbo, iron,chromium,nickel,soot, etc. gives me numbers but my question is what #'s are within normal limits. any help. Thanks. :eek: (iron...
  11. P

    Engine/Transmission (1998.5 - 2002) Fast coooolers

    Anyone running fast coolers on a 02 4x4 6spd with 4in. exhaust? Whats the clearance from the exhaust? Dimensions of the cooler? Recommendations for the replacement oil refill. Glad my BD exhaust brake was installed further down the pipe.
  12. P

    Engine/Transmission (1998.5 - 2002) No reverse light.

    Say folk's gotta 02 2500 6spd short shifter. Last winter when it got cold the reverse light's did'nt work. But when it got warmer they worked ok. Now it's cold again no reverse lights?
  13. P

    Engine/Transmission (1998.5 - 2002) fuel pressure gauge

    jus installed westach gauge, using the fuel pressure outlet test port fitting to the sending unit. eng. is warm. started up but the motor cycles up and down, lights go dim and bright like when you start up on a cold am. did i do something wrong?
Back
Top