Search Results for Query: *

I've been trying to level the front end with new coils, spacers and to make it easier I should remove the brake caliper so I don't damage the brake lines. My question is this, shouldn't the two smaller 13mm bolts holding the slider come off without having to remove the caliper bracket? I'm on...

Hey gang, What's the maximum lift on these front suspensions on a 2500 without causing the upper "A" arm coming in contact with the spring perch ?. I don't want to change out spindles because then I'll need to purchase new wheels with less backspace, just want to do it with new springs and or...

Just got my seat covers from Geno's for my 07 and the 2 seats went fine. The center console is frustrating, there's no identifying marks other than "Made in Mexico" on the two halves and no instructions. I've tried fitting them both ways and seems either way either interferes with the catch on...

Just noticed on my new 2007 Ram 2500 the rubber coated trim piece right at the bottom of the window is sticky. And when I lean my arm out with the window down I end up with what looks like black grease all down the bottom side of my arm. WTH did Dodge use on these trim pieces? First I thought it...

Recently purchased my new 07 with the 5.9 and have already started improving where Dodge left off lol. So I removed the tripple gauge pod off my 2nd gen which had the Autometer EGT and probe and want to put it on the 07. I am also looking at a Smarty touch for this truck instead of the Edge drag...

Hey gang, I've typed in every possible way into the search bar for some info on the extra un-used connectors below the radio on my "07" 2wd 2500 and nothing useful comes up ? I've gone out to the internet and most lead me to the Ram body builder site to possibly look for a wireing diagram but...

Is there a safe online site to download specific repair procedures on our HPCR systems from Cummins or Mopar? The Haynes manual is very limited and mostly geared towards the gassers I tried adding a Vehicle to my ALLDATA Subscription last night and their having glitches processing payments. I'm...

Just picked up an 07 Ram 2 wd 2500 but I need to find out what is the normal ride height of this model. I tried searching for hours and can't find specs on rear bumper or bed height from the ground. I know the 2 WD sit lower than the 4WDs. The existing rear leafs 3 + the overload doesn't have...

Hey gang, Ive owned this Truck for almost 20 years. It recently got hit on the front right fender, that is why I'm selling it lower than the appraised value. This truck was my spare work truck and I maintained it meticulously and has been very reliable except for the upgraded trans and torque...

I noticed some changes to the site, but there's so many hurdles to get thru to track my posts. My older posts can be found under "Conversations" weird but shouldn't they all just be called "Posts" or maybe recent activity? And my current posts were under ... well I cant remember now how I was...

Hey gang, been off the site for a while but back on sporadically. I was trying to figure out why first my signature was appearing under my posts so I went in to edit my signature and every which way I tried I kept getting a browser window popping up telling me ...*Your signature is 346...

Ok Gang, I just upgraded from a 2nd gen 3500 to a 3rd gen that has the H&W turn over ball in the bed. I've eliminated the hokie adapters or Andersons. I'm down to getting a Curt X5 adapter and still using my 200+ lb. Hitch or maybe a Companion #3500 at just under 200 lbs. Or the Demco # DM...

Just purchased on Saturday an 07 with the 5.9 , manual trans and 158K on the clock. It all looked good, fluids, no blow by or smoke. So I was driving it about 125 miles back home in the rain to Temecula. Stopped about half way and got 20 buck fuel at a 76 even though it had a quarter tank in...

I should know this coming from a 2nd gen, but looking for an "07" with a 5.9 to buy and not sure if all these come from the factory with HX40s? or do they still use the HX35? The first Mod I do on anything I buy is make it heard. And I've heard these newer than mine common rail 5.9s with...

I'm looking for an "07" 2500 to replace my 98.5 Dually that got a black eye from an SUV that was on the phone instead of seeing the Stop sign lol. So I'd like to put some of my engine bling on the newer 5.9, specifically my Cummins Valve cover. Is the newer 5.9 a whole different Beast?

Hey Gang, I have a 98.5 1 ton long bed with a lumber rack I had to modify that came off a ford with parallel rails. Evidently the newer cans are wider so they taper the beds to match the body lines at the front but keep the rear about the same as the older truck beds. Anyways I'm looking for an...

I have a 98.5 3500 and need some dually rims that have more offset. Does anyone know if all the newer duallys still use the 4-3/4" pilot hole and the 8 X 6.50 stud pattern along with having more offset to allow more room between the rear duals ? Are there any wheel specs published anywhere for...

Looking for someone near the Southern California area who might have a couple Stock OEM 16" Dually wheels .(Non Coined) lug nut style. Please call Walt 951-852-9876 Thanks

Looking for someone in the So. Cal. area that might have a couple Stock 2nd Gen Dually 3500 steel wheels for sale (non coined) lug nut holes. Please call Walt 951-852-9876 Thanks

I'm getting a little burnt out chasing re-occurring problems with my 24 valve 5.9 and want to upgrade to a 6.7 but dont want to add DEF fluid so I heard to look for a 08 to a 2012 and avoid the first year of the 6.7 because of the typical first year issues of that motor. My 5.9 only has 170K...