Search Results for Query: *

Questions my isspro fuel gauge is make noise under a load. Can someone tell me how to fix this or does always happen. Does this mean i have air in the line? Thanks for any help. :confused:

Questions maybe someone can help???? got gauge hooked up at idle it reads 15psi then drops to 5 . then when i drive no load or hill running around 70 mph it goes up and down from 15 to 5 then back to 15 will stay there for a few mins then go bavk to 5 on and on. Whats up with this... andy...

All you guys with 02 ctd, Have you had problems with genos fuel line that they give you that screws into the vp44???? the problem is that it will not push the scharder valve in and smash the plastic part on the inside of the line . . Andy at genos was a big help on this he said to unscrew the...

Can some one help me i got my kit from genos. hooked up tonight and cycled key no fuel???????????????? It say to hand tighten line to vp44 and turn 3/4. I have no fuel to isolator???? iam i doing something wrong. Is the scharder valve not opening IAM STUCK. also genos says no teflon tape on...

Do you need to bleed the isolator out with coolant???? Will it mix with the fuel and go back down to the pump?? I seen a thread that someone thought it might have made there vp44 go bad . getting ready to hook my fuel gauge up. Any help would be great. andy or any helpful tid bits :)

Question it says to fill and bleed air out with coolant. Would that be antifreeze. 2. Is all this bleeding process needed? Or can you hook it all up and just cycle the key a few times thank you for help on my fuel gauge install and any other helpful hints would be great. i bought the kit from...

Got my fuel gauge kit from genos today and have some questions and need help please . lahf line when you hook to vp44 due you cycle switch to see if there are leaks with out the other end hooked up. Or due you hook to the isolator then due the bleeding process. also it says to fill isolator with...

Does any one know the edge part # with screen for the 02 ctd andy

I Have 80,000 On My 02 24v Is It Time For A Adjustment On The Valves. I Heard That You Do Not Do It Untill 100,000? And Is That Something The Dealer Can Do??? Thanks Andy

Is it poss to mount a mechanical fuel gauge on the out side of truck up near the wiper cowl. i had one on my mustang. it was a outside gauge????? thanks

what is the best adjustment #s on my 02 ctd ho intake and exhaust. I know everyone has diffrent numbers . Just looking for best performance . Has 80,000 on it with ez and exhaust thanks andy

Question my 02 ctd has 80000 on it. Last week i noticed a noise. only can here it in cab open the hood can not here it. Sounds like a valve noise does not do it under a load only at idle or when you are off the gas pedal. never have remebered this noise before. do my valves need adjusted. You...

Just wanted to know if there is a place that works on ctd called antram diesel. Heard they where great and where loacted near gettysburg pa. thanks for the help if anyone knows???? would like a phone # andy

I have a 02 ctd with ez and boost elbow. Could only make about 24psi. So i pinched off the hose between elbow and waste gate made 30 psi is this ok or is it not good for truck. Did not feel much more power from 30 to 24 psi. And if it is ok can i just cap off the turbo with a ntp fitting and...

Have 02 ho 6 speed all stock with ez and the elbow. Only see 24psi at gauge. Is that good? check for leaks none. See alot of talk with other quys hitting 30 psi with same set up. Should i worry???? Thanks andy

Have a question went to change my fuel filter and i have dirt particles in the bottom of the canister. Is it ok to suck all the fuel out and clean the dirt out and will it fill back up with fuel by bumping the starter over. I already put the filter in and it seems to run fine. And does that...

Trying to find someone or somewhere who have these tires 285/75/16e load range in stock. everywhere i call out of stock. bfg has came out with this in a tko but has not put in production. I want this size tire but do i need a e load range. pull a trailer sometimes. Will my truck handle diffrent...

Just wanted to see if any members know of any performance shops in the maryland area to work on my truck and that are good and know alot about the ctd . I live in hagerstown thanks andy

I have a 02 ctd with exhaust from turbo back, edge ez with boost elbow, gauages that i just installed. Boost and egt. Went for a ride and truck only hit 24 psi of boost. Do i have a boost leak? how do you check? Could it be my egt probe where i tapped the manifold. I was told that my boost...

I have 02 ctd with exhaust from turbo back,edge ez with elbow. Just put my gauges on. Boost and egt. everything else is stock . Went for a ride and only hit 24 psi of boost. Could i have a boost leak? how do you check. Would my egt probe be leaking where i tapped the manifold. Need help. Iam in...