Search Results for Query: *

i just put gauges in my 95 ram and was wondering if they read right i tried fing in the search and couldnt find. boost is 17 lbs max and fuel pressure is about 30 going down the road. it is a stock unit except timing is 16

what puts the front end in 4 wheel i went to use 4 wheel today and it didnt work. the transfer case works but 4 wheel doest. have lotsa snow on the way in mn. im going to need it i did not try 4 wheel since i9 bought it

is 16. 5 to much timing for a 95 truck that i will be towing with? i just had to pull pump to change the tappet gasket and put pump together and came up with 16. 5. and its all back together .

in the tsb to time a pump it says that 1 revolution of dail indicator is 1 mm and the small one is 10 mm my indicator i got from mac shows 2. 0 and small one is 30 mm am i reading it ring before i finish timing my pump

in the tsb to time a pump it says that 1 revolution of dail indicator is 1 mm and the small one is 10 mm my indicator i got from mac shows 2. 0 and small one is 30 mm am i reading it ring before i finish timing my pump

well i made a beginners mistake. i didnt pin the pump when i took it out i only pinned the engine. to find tdc on the pump do flip the pump pin around i put that plastic pin in until it locks for tdc? and then after that rotate ccw until dail indicator stops moving and rotate clockwise to 6. 3...

can you time the pump on a bench then install in engine with the engine at tdc?

i pulled the injection pump out to replace the side cover gasket on my 95 and was wondering if any one else put some sealer on the gasket or any other ideas to make sure it doesnt leak again . and also since i have it this far apart anything else i should do? it isnt one of my favorite jobs to...

im pulling the injection pump and i have the gear pulled and mounting nuts off but it wont come out . is there a bolt mount from block to pump i cant seem to find it.

where should i run the line for my new boost gauge to ?putting a triple gauge pod in my 95. and opinions on thew egt gauge sender also

i have 95 1 ton dually that i haul a 20 ft car trailer with and want to get a 10 ft truck camper . what can i do to haul it extend frame? extend hitch ? any one do this ? any idea would be great. yhanks in advance

does anyone make a such thing for the balancer as a degree tape ?

how do you go about finding tdc with the drop valve method? thanks

i just bought a 1995 3500 4x4 4. 10s with the 5. 9. when first bought i couldnt get it to go past 2200and 70 mph empty and about 65 loaded total weight for car trailer and truck was 14000 pounds. i didnt know if that was right or not. but reading i thought would replace the lift pump and clean...