Search Results for Query: *

Was getting a check gages light and the alternator was running at about 8 volts. The gague seemed to be jumping around for a month or so now. So last night I replaced it with a new Bosch. Everything was working ran to get fuel and it was charging like it should. This morning jumped in the truck...

In the last few weeks my trucks A/C has decided to only work when it wants to. It will work great then Ill shut off the truck for a bit hop back in and it wont work. Truck will sit overnight and turn the a/c on and it will be back to normal the next day. This has happened about 4 times now in...

I recently picked up a 1995 F-Super Duty Cab and Chassis. I also picked up a super clean pick up bed for it. The problem that I have is that when I center the wheels in the wheel opening I have a gap between the cab and box of about 5 inches. I need some ideas of how to fill that gap so it...

Im working on one of my front end loaders just typical stuff before the snow storm where I may or may not need to use the machine. Its a 1990 michigan L160. The issue that Im having is that the running lights are staying on even tho the switch is off. Its a 3 position switch...

Last night I finally had time to pull out my transmission to get it freshened up and to my supprise I found that 6 of the welds on my Sun Coast double laminated Flex plate were cracked. This is the second one from them that this has happened to. The first time they warranted the flex plate with no...

My truck has been throwing this code very randomly it either does it right around 70 mph or while rolling to a stop. It doesnt do it all the time and you dont know when its going to do happen. Its very random and very annoying especially while traveling and having to pull over to clear the code...

In the last 4 months I have replaced my front crank seal 3 times. The first time I put in a new seal and resealed everything up good. It didnt leak for about a day and then it started leaking again. I put it off for a couple of weeks and then tore everything apart again figuring maybe I didnt...

So I was driving up north and went to use the wipers and nothing happened except for when I turned them on HI and they acted like they were on super slow motion. They did this for a bit then got stuck. So I finished my trip with no wipers at all. I got up north and the next day I went into town...

I need to remove my steering wheel to replace my wiper switch, but I have never pulled a wheel that had an air bag. I have the puller and knowledge how to do them without an airbag but not with one. Any help would be appreciated. Thanks.

My factory clutch fan has died and I need to replace it. Do I put another factory one in for $300 and some change or is there a better aftermarket one out there? Just curious what everyone else has done and what is working. Thanks

Was driving home tonight and my truck randomly died going down my driveway. Iv been noticing that my fuel pressure gage has been all over the dial within the last few days. Anywhere from 5 to 20 psi. I figured it was time to change the filters, havent done that in about 15,000. The rail pressure...

For the past few weeks Iv been getting intermitten power loss. The power comes and goes, one time driving the truck Ill hit 40psi with out trying and the next time I cant get over 18 and the truck wont get out of its own way. Iv replaced the CP3 regulator, and the Pressure relief valve and...

For those of you who have installed there water meth systems on a 3rd gen, where did you mount the pump? Im planning on getting mine put in this week but still havent figured out where I want to place the pump, and if I use the bottle provided or tap the washer fluid bottle. I want to try to...

Recently my trucks rpm gage has been all over the place from running way to high to running was to low. It has also thrown the codes of P0148 for fuel delivery error and P0299 Turbo underboost. Are these codes related to my tach not working right? It has put the truck into limp mode too. I...

I just purchased a stage 3 snow performance water meth kit to go along with the mods listed below. :D What Im wondering is, can I use the same EGT probe that my edge box is running off or do I need to drill another one just solely for the water meth? Anyone try this? comments? Thanks again.

Has anyone had a problem with there built transmission not wanting to shift at WOT? It will shift normal when just driving it but as soon as you mat it, it will not shift unless you get out of it, then it will shift. The engine will keep reving untill rev limiter kicks in but the trans will not...

My transmission cooler just started leaking and from what I can see its leaking from the fins. I dont know how or where it is exactly but it seems to be leaking from the upper left hand corner. So I called the dealer and they are of course out of stock and on back order and they have been for a while...

I just installed a Draw Tite Activator II brake controller on my truck and for some reason it is always on. I havent even pulled my trailer since I hooked it up but it comes on everytime I hit the brakes?? I checked and rechecked the wires and everything is hooked up correctly. I should only...

Iv had a FASS 150/150 on my truck for about 8 months and recently it has been giving me trouble and now its completly dead. Last night my fuel pressure gage was bouncing all over the place and then just went to zero. I got home and left it for the night. This morning I went to fire the truck and...

Was driving along today and flipping through radio stations using the steering wheel controls and the left side control all of a sudden got stuck. It still works but now if you barely slide your finger over it, it will change stations. Its the center button that is stuck, the one that changes...