Search Results for Query: *

Well maintained, low mileage (158,375) 2000 Dodge Ram 2500 2WD quad cab, Gen 2 5.9L Cummins with 5 speed NV4500 manual transmission. Extras include Pacbrake exhaust brake, FASS fuel delivery system, Edge Juice with Attitude performance chip with display screen molded into driver's side...

try [url=http://www.autolumination.com]www.autolumination.com. they had what i needed for my dash lights and they have leds for all automotive needs.

fest3er, The one I pulled apart last night was a stock dodge twist lock, I have not seen what the aftermarket has except for the superbrights

fest3er, They will come apart, but, the replacement 194 lamp that we can buy have a looped wire thst is folded against the wedge of the lamp, the ones that are in the twist lock from the cluster have only one wire on each side and are soldered to the contact tabs that are pressed into the twist...

Ok guys, Again thank all of you for the feedback. What I am wanting to do is change out all lamps in the dash to blue leds. And Midnite you are correct that the back light lamps are 194 but dodge had a better idea, glue the lamps into the twist locks so you cant just replace the lamps. And...

budnate, The lamps I am talking about are the ones that come on with the running lights/parking lights. All of them are twist locks and very easy to replace. The stock dodge lamps are a one piece unit and I may have found some on super brights that I did not see before but they are two pieces...

fest3er, thanks for the reply and yes SUPERBRIGHTS does have the A/C heater swtch light but not the headlight switch light or the cluster lights

I have been trying to locate leds for the cluster,headlight switch and A/C heater switch. I have tried searching TDR and came up with nothing. Tried the web, came up with lots of places and only found the A/C heater switch leds. Has anyone done this and know where to buy them?

JEngledow, I mounted the pump exactly as the instructions said and the fuel pressure sending unit came with the edge juice w/attitude and is mounted on the VP. The plug is for power, and I live im montana so I do not want to by-pass the fuel heaters. Sometimes it will get down to 30 below. The...

I purchased a FASS95 about a year ago and installed it on my 2000 Quad cab 2 wd (edge, kn, 4" exhaust, psm intake tube) I installed it myself, as I do most of my own mechanic work. Since installation, the pressure has bounced from 9-13 lbs. just driving down the road. Sending unit was placed...

I purchased a FASS95 about a year ago and installed it on my 2000 Quad cab 2 wd (edge, kn, 4" exhaust, psm intake tube) I installed it myself, as I do most of my own mechanic work. Since installation, the pressure has bounced from 9-13 lbs. Sending unit was placed between filter canister and vp...

Would anyone happen to have the year or part # for the GM 3500 wheel cylinder upgrade for the rear of my 2000 2500 with a dana 80? i would like to try this cause my rears are not working all that well. thanks guys

does anybody have the part # or the year for the stock gm 3500 wheel cylinders that Joe Mc tried on his truck? i would like to try this to my 2000 2500 cause my rears are junk!!!! thanks guys

I have an exhaust brake on my personal truck, and an internal on my work truck [sterlingwith a C12]. I like the exhaust brake but would love the internal! Yes I would buy one.

While driving down a steep mountain pass, I had the exhaust brake on (pacbrake) and had forgotten to turn off the cruise control. The cruise control and exhaust brake began cycling on and off, but it didn't register with me that this wasn't normal. After we came down the hill and had started...

I wouldn't mind having that on my 2000 as well.

I had a bulb do this on my old truck once. I used a 1/4 inch piece of hard plastic tubing taped to my shop vac. I got all of the glass out and most all of the white dust. hope this helps

please spend the 15. 00 to 20. 00 bucks to have them properly adjusted and help save all of our eyes thank you

I just changed mine yesterday. The redline rep for a real good transmission shop im my area (montana) said that a 50/50 mix of MTL and MT90 is the proper oils for the NV4500. I have about 50 miles on the truck today and I can already tell a difference. hope this helps

I have a 2000 2wd, and my ball joints are riveted in (factory). You have to grind them off(the rivets) to replace them. The new ball joints come with bolts so they can be replaced