Search Results for Query: *

On my 06 CTD Dodge I can't find either a fuse or relay in the PDC marked for the fuel pump. Can anyone post a wiring diagram with the color coding for the feed to the pump? Thanks Rick.

I have an 06 Dodge CTD 4wd 2500 and three 2nd Gen. Dodge CTD'S. Can I use a 2nd Gen. adjustable track bar in a 3rd Gen. truck, Then use the OEM 3rd Gen. track Bar after rebushing in the 2nd Gen. truck with the bracket from the 2nd Gen. kit? Thanks Rick

Can anyone tell me what the bolt torque is for the three steering box mounting bolts on a 06 2500, 4wd? Thanks Rick

We recently added a 06 CTD 2500 4wd to our three other trucks. Today the steering shaft broke off at the pitman arm. Luckily the truck was just leaving the driveway when it broke. It looks like it was cracked halfway for a while judging by the rust at the break. Has anyone else had this happen...

I'm looking at a 12V motor out of a 95 Auto truck to put in my 95 5 spd truck. Can I get the difference in HP between the Auto and 5spd up without sending the P-Pump to the Inj. Shop. Where is the difference adjustments or parts? Thanks Rick

I changed the L/P on my 95 Dodge 6 months ago with a new one from ebay. It has now gone bad. I removed it an checked it against a pump that came off a 98 Dodge. I found that the cam plunger on the ebay unit was a 1/4" shorter than the Carter pump from the 98. Both trucks still had the...

I have a 95CTD with a 5spd. After having the throttle linkage Recall done I noticed a bucking problem when on rough roads. I checked the area where the Recall was done and found the long bolt that holds the spring bracket backed out and no bracket or springs. Checked with the dealer that did the...

I want to add relays to the headlight wiring on my 99 Dodge 3500. Can anyone tell me when they went from switched power to switched ground? When I checked power at the headlight harness plug I had 11-12V at pins A-VT/RD & C-RD/OR on low beam and A-VT/RD & B-VT/WT on high beam. Should it be...

No one has any info?

I am replacing the broken sport headlights in my 98 dually. The prior owner installed Hella HID'S in the outer bulb sockets wired to the low beams. I want to rewire using relays and have the low beam HID'S stay on with the high beams. Does anyone have the proper wiring diagram to do this...

Prime-Lok JDKammin, I have one installed on my 98 and it does make some things harder to reach. If you ever have to change the fuel filter on the road at night,in the freezing cold you will quickly see the advantage too having the Prime-Lok. If you are interested I have a brand new one still...

On a trip back from Lake Placid this weekend my son mistakenly refueled the truck with E85 ethenol. It was idling at the pump and stalled out while refueling. The tank was close to empty before refueling. He had it towed to a shop and they drained,flushed,& bled the system. Changed filter also...

I have a 98 Dodge CTD with aftermarket sport headlights. The ballasts are Hella's with xenon bulbs. The HID's are wired to the low beams. The high beams are wired to a 9004 bulb. Is this correct? Does it matter which bulb sockets are used for each? Thanks Rick

I don't know what trans. you have behind that 12V, but I have a 99 24V with a 47RE trans that came apart twice after having it rebuilt by a dealers mechanic. I had bought a T/C & some parts from Goerend Transmission, so I called them for advice. Dave & his staff went above and beyond the call to...

I just installed a GDP392 lift pump kit in a friends 01CTD as I did in my 99CTD awhile ago. I notice that the pump does'nt run for 4 seconds when the key is turned on in the 01 like it does in the 99. It will run for 20-25 seconds if I bump the starter though. Has anyone had this problem or know...

My neighbor lost fuel pressure on his 2001 24V and couldn't get it running. I scanned it for codes, no DTC's found. Checked fuel pressure,it was intermittent and went from 8lbs to 0. I replaced the fuel filter and stock lift pump with a GDP 392 lift pump kit. Had 18-20 PSI with new pump but...

No one here knows this?

Can anyone tell me the type and size of the inlet and outlet ports on both the fuel heater and lift pump? Thanks in advance Rick

Can anyone post the A/C wiring schematic for my 95 2500? I have no power between the A/C clutch and the relay. I ordered a service manual from Genos quite awhile ago, but it's still on BO. Thanks Rick

Hi all, I'm planning to upgrade the steering linkage from the Y style to the T style on my 95 Dodge. Can anyone tell me if I can use the same drag link adjusting sleeve and tie rod end at the Pitman arm that are currently on the truck? When checking part numbers for the tie rod end at the...