Search Results for Query: *

does any body know what other dodge models share the same a/c compressor clutches that 12v trucks use. thanks

I switched out everything that was different on the v10 from diesel. i checked the pcm at the pins going out and its shot. new ones on its way. i think i have a asd relay problem too. its getting no power but if i read right it gets a voltage from the pcm so that would explain that too.

i am getting no wait to start light, and i have no idea if there are any codes, no scan tool

So I have everything in and truck runs and drives great (thanks steve!). I have a 96 pcm and wire harness and a 97 truck. I have no guages except oil pressure. I started noticeing that the charging system was not charging then after reasearching i found out that it gets its trigger from the...

i feel kinda dumb, but its still confusing. i loosened the starter bolts about a turn, and it now works.

i have tried starters from both a manual and auto, the starter spins, and the bendix comes out but from the looks of it it is crashing into the flywheel (shiny spot on flywheel about . 40 to . 50 of an inch from the end of flywheel teeth). will try to get a pic up tomorrow. the truck does not...

i am pretty sure my clutch is a 12. 25 because it came from a 97 truck. it bolted to the flywheel just fine. what would my options be if the flwheel is indeed a 12. 25 and the starter is crashing into it? what else could the flywheel be from?

i was thinking about that but would a 12. 25 inch clutch and pressure plate bolt up to the 13inch flywheel?

I am using a flywheel from an 01 with a nv4500 trans in my 97 v10 auto to cummins 5spd swap. the starter is crashing into the flywheel teeth from the looks of it. i have tried the starter from an auto cummins i had, and one for a 5 spd. neither work. i am starting to get fustrated and need help...

I am doing a cummins transplant into my v10 the truck is a 97 and the donor is a 94, i am worried about the plugs going into the body harness, the 3 plugs if your looking at the front of the truck they are on the right side. they are different on both trucks. i am wanting this conversion to be...

i have 2 questions. i just picked up a nv 4500 for my swap and it has the old style top plate on it but it has no shifter in it. the hole is empty. where can i find one of these reasonably priced? my next ? is where to find a 29 spline input shaft for my t case, i have called bluementhal and...

i cracked a line, took the plunger out, i have fuel to the lift pump, to the filter, to the injector pump, comming out of the injector pump and comming out of a line going to the injector. it actually sounds like it wants to start, but it doesn't. how common is a stripped gear on the injector...

i dont think it has an air leak, it didnt act up, or sputter it just flat out died. it wouldnt even act like it wanted to start after.

well i went back today and fiddled with it some more. fuel solenoid is hooked up, and i can hear it click when i unhook it, and i also ran a jumper wire to make positive the wires were ok (test light showed current) i unhooked fuel supply line and cranked to make sure fuel was getting to the...

quarter tank. as far as i know the solenoid ishooked up, can it just come unhooked? i was so mad i walked home and didnt think to check that till i got home.

well tonight my truck quit running. was driving down the road. Thought i was out of fuel, no not it. has fuel comming out of the bottom of the fuel filter. other than that im lost. it also shakes the hell out of everything when i crank it over. maybe the shutoff solenoid? although i am thinking...

Daniel, i think i will need soem pedals, what will they come off of? let me know, thank you Ed

I live in St. Louis, I am 21, and my truck is pretty much stock, 3 inch straight piped, boost guage, soon to have my pyro instaled, and my 4 inch pipe as soon as i buy a downpipe. also have a set of alcoa style wheels on there. as soon as my pyro goes in she wil start getting turned up :) more...

Hello all, i have owned my truck now for about 4 months and i love it! i have some old pics of it, since i have repainted the flaking off white paint. It is a 89 with 187k miles. has the 727 but soon to be swaped with a nv4500. i had a question with the swap. What trucks can i use the pedals out...