Search Results for Query: *

Did you sell the snow kit yet? If not how much and can you ship to fl. Thanks Francis

If you put in a blue chip special x pump it has added timing advance built into the pump. If you are running level 9 on the smarty it adds timing so now you have more timing then you used to. level 8 is the same as 9 but without the added timing.

one is the light the other is for outside air temperature sensor it is in the grill at the front of the hood.

http://www.fostertruck.com This is a Larry b's web site They sell brand new denso starter's for our trucks. A little pricey but they are new denso

ECM - engine control module mounted on left side of block below fuel filter controls wait to start light and fuel pump. PCM - power train control module on firewall behind air filter does not control wts light and fuel pump had a similar problem years ago got a eco from a 01 and flashed it with...

Check the output shaft speed sensor. Can cause shift problems.

I agree on the inline mount turbo. I had a turbo mount eb on my 99 then I upgraded the turbo so now i have turbo mount eb setting in a box on the shelf and pac brake inline mount on the truck.the turbo mount was also a pac brake and have never had any problems with either one. Francis

It may not be blow by. The vacum pump exhaust is into the crankcase. If you have a broken vacum line it will smoke alot out the crankcase vent and build up alot of pressure in the crankcase. Francis

Is your wait to start light coming on as soon as you turn the key or does it stay off until the pump comes on? If it is delayed then its probably the ecm. You can type in wait to start light and the are many threads about it. some people said they cleaned grounds and electrical connector and...

I have a 99 with the b&w turnover ball underbed hitch with airbags. From b&w the brackets mount to the frame with the ears for the rails that cross over pointing out away from the frame. It was made that way so you could get to the bolts. What i did was swap the brackets side to side. That puts...

How many rpm's does it change? if it's only 200 - 250 it might be the tourque convertor lock unlock problem.

go to car-parts.com its a site linked to salvage yards all over the country. just put in the area your in and it will show anything local to you. make sure you put in the - between car-parts or it goes to a new parts store. francis

Mine did the same thing. It was the crankshaft position sensor.

Does anyone know if the controller is the same for air or hyd brakes and just the sensor is different or the controller itself is different. I'm asking because i found one for air. Thought i might get it and get the right sensor for hyd.

Since it seems that maxbrake is out of business has anyone tried the new controller called directlink?

is maxbrake still in business? i read on some other sites that they have went out of business.

you might check your vacum lines. Yhe vacum pump discharges into the crankcase. If a line is broke it will pump alot more air into the crankcase wich then goes out through the puke bottle. Francis

If the vapor is exsessive it may be a vacum leak. The vacum pump exhaust go's into the crankcase. Mine did the same thing and i found a tee on the firewall that had split.

sounds like the lazy wait to start light issue. start by cleaning all electrical connectors. if that dosent fix it you probably have a problem with the ecm on the engine. some people have said they had the ecm reflashed and it worked. i had the same problem but i had to replace the ecm. got mine...

I agree it's the oil pressure sender. I have replaced 2 of them. One of them went bad when the o'ring on the fuel heater went out and leaked fuel on the sender. genos carry's the sender at a good price. Francis