Search Results for Query: *

Amazon.com: 3M Headlight Lens Restoration System: Gateway Nothing works better. DO NOT use a liquid restorer! Read posts on-line. I have used these kits on several cars and the lenses are like new when done. Tkes about 15 minutes each headlight. You HAVE to remove the uv damaged yellowed...

They truly are THE BEST. I always tell Cummins owners about them. I even tell the Cummins dealer parts guys about them! Best prices, best service, best return policy, no hassells, great advice and a patient ear on the phone. Yes, I think there are a few things that they should carry in my humble...

Smarty Jr Giveaway! Put my name in the hat again too! And thanks for being a great sponsor. Eric

no need I would NOT change your thermostat to a lower than OEM degree thermostat. Your Dodge is computer controlled and relies on the temps to be at a certain range for everything to work together in harmony. Also a diesel is way more efficient at higher temps than lower ones. Check out...

That's all folks! Refering to the last two posts will give you all the info you will need. It's the same info i used and all went extremely well. All part #'s are correct. The deal on ebay with brackets and shipping sounds like great deal and I can't imagine there are more than one or two mfg's...

You will need the factory reinforcement brackets that these bigger mirrors require! They install on the inside of the door over the mirror mounting studs. I bought the aftermarket power heated mirrors and the work fine. They seemed to "gray out" pretty fast so you might want to armor-all them...

Just returned from a long trip to yellowstone etc... and your gauge is reading completely normal. I replaced my thermostat with a genuine Cummins thermostat as a precaution and consistently had the same readings as yours no matter whath the grade or outside temp. If your Fan Clutch...

Saw a Flying J on the way home from vacation in Troutdale Oregon with a "Loves" truck stops Banner placed over the Flying J signs.

Was just talking to a guy that owns a disel shop here in portland because I was concerned about drone on a 4" turbo back system I was thinking about buying and he informed me he has tried a dozen different configurations on his Dodge and swears that two mufflers installed is the answer to the...

Oil out of cap after sock installed OK, So I bought my 2001 a year and a half ago and the crankcase breather bottle had been deleted and a hose extension with a large plastic 90 degree elbow installed and zip tied to the sway bar. Before going on vacation two weeks ago I decided to zip-tie a...

What I love about my truck. Three words. Cummins Diesel Engine. It's the ooooonly way to drive. Period. 'nough said...

So far the only thing that would work is the 1/2 cord of wood! LOL. Is anyone paying attention? I HAVE A 2-WHEEL DRIVE, Count 'em, 2 WHEEL DRIVE Ram. NOT A 4X4. Anyone seen a front leveling kit for a 2 wheel drive?????

Rear springs and lowering truck Well, interestingly enough I was able to only remove one 1" spacer from between the axles base plate and the bottom of the lower spring. The bottom of the spacer and the bottom of the spring both have a nubbin sticking out of it that sets in a detent in the axle...

Trans HAS to be dropped. It is located between the engine and the trans. The flywheel is attached to the crankshaft and the torq converter is bolted the flywheel and the torque converter nose slides through the transmission front seal into the pump housing... it is full of trans fluid...

I have a 2001 2500 short box 2-wheel drive and the rear sits up way too high. Can you explain your response that states "cut 2" out of the rear spacers. I either want to cheaply level out the truck. Lift the front via a spacer?? or some how lower the rear. The rear(lowering)would be nicer for...

It's faster, cleaner and quicker with the key and besides, for me, I just don't like to find out the hard way. : )

Absolutely Correct!!! Do NOT pour diesel in the filter housing! You will introduce particles into the fuel system POST FILTER. Not good! ALWAYS use the starter bump method. It works! (unless your lift pump is toast) This is when you will find out if your lift pump is non-functional and your VP44...

Take it back... Take it back and get all of the following from Geno's garage. It all fits and works as it should. The schrader valve core is removed and the line is used to extend to a spot to mount the transducer in the bracket. From there wires go to the dash and the mounting plate replaces...

MBowser, Thanks for posting the Pics and info. I'm glad to find that out now rather than later. I still need to find out if the factory part# comes with the Park lamps attached like the pictures show http://app4.websitetonight.com/projects/4/6/0/8/460809/uploads/01BE_moparpartsamerica.com.pdf...

It was almost me! I ordered a set from moparpartsameica which is just down the road from me but then they said they were an updated # and were a little bit more $ and they were on backorder. Ugghhh. I cancelled the order so I could think about it a bit more but I did order the headlamp relay kit...