Search Results for Query: *

understand that but the solution was the ground. don't apologize

That broke at the frame because when the mount was moved the nitwits welded it to the frame where the 2 holes act as weak spots. Take it to a local fabricator and have a plate made (and welded in) that will go between the frame and panhard bar mount covering the crack AND both of those holes...

did you read the thread? He found the problem it was bad ground. AD will warranty a bad pump IF the warranty card was sent in. (assuming the pump is bad and it is not a wiring issue as this was).

off road? on occasion. Nothing spectacular. Roads? 90% Pennsylvania secondary roads (ask anyone how "good" they are :) ). 35-55 mph. 10% interstate.

Cooper Discoverer A/T3 All-Terrain Radial Tire - LT285/75R17

well ,my last set of Cooper AT3's went 80k miles and the current set is at 108k miles. '04.5 QCLB 4x4. Have the toe-in set to 1/8" toe-in. No more, no less. "within spec" isn't good enough either. Camber on my truck is 1/8*pos. both sides. I won't buy anything else. Granted I'll be ready for new...

Just a little FYI if that doesn't work out, 70 cm/27.5" is (+/-) a quarter wavelength in US FM band 88 to 108 . so unless you want an extremely long antenna this is the optimal size for descent reception.

sorry all the wiring is long gone.Bob

where did you send it? send in the 4.95?What will I need to submit in order to receive my next grill badge? To receive your next grill badge recognizing a new mileage milestone, please complete and submit only the top portion of the Membership Application, along with a photo of the exterior of...

Sorry Mike the best is long gone. Bob

If it's on the list I have it. If it's NOT on the list I don't. That being said, no I don't have the hood. Here is the list again: 2003 Dodge Ram 3500 QCLB 4x4 Diesel Dually Parts Instrument cluster (odo 133,xxx) $75. 00 hood latch cable and handle $10. 00 Air Bag/Passenger side $75. 00 A/C...

sorry, gone

Post up where you saw that BP filters down to 0.05 microns. I/we need to see that one. $10k on fuel filters in 250k miles? even if you changed the fuel filter every 1k miles that's only 250 filters @$30 a piece (pulled out of a receipt box) that's still "only" $7500. And I don't know anyone...

sorry gone. Unless the hinge is totally Fubar'd you might try just the pin and bushing kit from Dorman. http://www.dormanproducts.com/p-50174-38479.aspx?year=2005&make=Dodge&model=Ram%202500&parttype=Door%20Hinge%20Pin%20and%20Bushing%20Kit&origin=YMM...

sorry long gone.

on the opposite end of the spectrum I have all the original (from the factory,"Y" steering) steering components still on my '04.5. The only steering part I've replaced is the trac bar bushings (dry rot). Haven't aligned the truck in 4 years (it very rarely goes off road and I don't beat on it)...

That added section is most likely because you have a QC. For reg cabs it isn't needed.

:rolleyes: agreed. If there was any "death wobble" kit available there wouldn't be somewhere around 15.9M threads asking how to fix it. :)

NEW Bosch stockers NO core. http://smartyresource.com/stockboschinjectors20045-2007.aspx BBI stage 1's, http://smartyresource.com/bbi-injectors-04-07-stg1.aspx

Patience all. When we have a "write up" in the works other priorities usually come first. We do these for the "fun" of it and as a service. Unless of course someone would like to step up to pay the bills and do the chores. We aren't under a deadline after all. :) Then again ya'll could also...