Search Results for Query: *

all chrysler warranties are transfered from owner to owner basic, powertrain, emissions, diesel engine... . etc... and some chrysler extended warranties are too

i've seen alot of accumulators go bad around the welds. It has a bracket welded to it to allow it to mount to the firewall. I guess the rust and vibrations make them weak. For some reason it's normally hard to tell if one is leaking just looking with a black light, the best thing to do is run it...

yeah, it's a major problem and that most people aren't properly servicing their fuel filters and using cheap ones doesn't help. Changed one the other day that had 42k on the truck and the owner said it had never been changed before. Truck was setting a rail pressure code.

Most of the injectors replaced are due to water contamination in the fuel and yes they are all dodges. Every once and awhile there is one with a box on it. I don't always put a full set in a truck but i do put atleast 3 in. If one is bad between cyl # 1&3 all 3 get replaced, the same with the...

I've always used trans fluid in mine and anyone that comes into either shop uses it. Normally on a regular basis, every fill up. It lubes extremely well and boost the cetane rating. For tanks with known contaminated fuel we use 2 qts trans fluid 1qt Marvel Mystery oil. Works wonders on the...

We are hoping the single Aurora 5000 will be enough, i plan on running the truck on a dyno after everything is on it to see what kind of numbers we can put up. If it's not somewhere from 900 - 1000 HP then i know it's not because of fuel and i'll put a set of twins on it. If everything does work...

Any recommendations on what 6. 7 intake horn to use, where to get, and prices?

You can mix any approved coolant with your Mopar coolant, make sure it is as close to possible with the Mopar. The light probably came on due to overheating the trans, i'm sure that's not what you wanted to hear. I've seen it alot with people travelling towing things. Make very sure when you...

Sometimes noise from your injectors can be helped by adding a couple of quarts of trans fluid into your fuel but other that that nozzles tend to cure it. And as for how a dealer is suppose to tell if you have a bad injector or injectors there are a few tests. Some things they look for is, what...

I've seen alot of these working in a dealership and i would say there is a 90% chance that your blend door is broken and the recirc door probably isn't far from it. Make sure both are replaced when it gets done, have them check you heater and evap cores while they are in there. Both doors with...

I have never seen a problem from a nv5600, but i've seen a few g56 with the side blown out of them, they will not take the power like a 5600. This truck is a very low mileage truck and already has a hole from something trying to exit the PTO cover. It has an egr, dpf delete, and an edge box on...

I'm looking to build a truck in the 900 - 1000HP range and have an idea what is needed to do it, but i'm looking for more recommendation and where to get some of the parts i need. Truck is 2009, 6 spd manual. Wanting to stay with a single turbo, believing we can make 70psi+ with Aurora 5000...