Search Results for Query: *

For what it is worth, I installed the Mag Hytec front diff cover. I drove from my friend's place to mine - six blocks or so - but when I checked the install (for leaks) I found that at near full turn the steering damper bracket contacted the front of the cover and scratched it (would have been...

Thanks for the info gents - I like the idea of the Carli high mount, will have to do some research and see what the consensus is for employing it by itself, looks like SierraRam has removed the stock lower entirely and is running off just the high mount.

Thanks for your thoughts HBarlow, much appreciated. Is your tank powder coat or diamond plate - how has it stood up to rust? I will be returning to Western Canada in a year or three and rust is a big concern for me in the longer term. Any idea why the smaller tanks cost more than the larger...

HBarlow, I agree about the space loss - really it doesn't effect me much except for the fact I would prefer to have a toolbox in place of the proposed in-bed tank. I have seen some inventive toolbox solutions for fifth wheel applications though, so that may be the route I take. I am pretty...

Transfer Flow has indicated to me that they will not be producing a replacement tank for my configuration (2010 3500 crew cab w/short bed). I am looking for alternative manufacturer recommendations, I don't know if Titan is planning on making a tank (have an e-mail in to inquire with them about...

Update - I drove about 20 miles and checked the rear diff - everything looked good, there was one 'spot' of "crap" on the dipstick, but it was very small. I will perform a longer drive tomorrow and post a picture if I get anything on the dipstick.

I recently replaced my differential covers on my 2010 RAM 3500 with 9,000 miles on it and noticed the old fluid to be somewhat cloudy/grungy looking from the rear differential. The front liquid was not grungy in appearance. Due to clearance issues I had to replace the aftermarket with the front...

Steph, Thanks for taking time to discuss with me today. I had a closer look after our discussion, the way I see it the bracket is a 'no-go' due to the tolerance on the tie-rod for the u-bolts (inadequate to move plate other than reversing it on tie rod - but then the angle of piston wouldn't...

I installed the MAG-HYTEC Dodge #AA 14-9. 25 that I had ordered from Geno's, was pretty straightforward. With the truck raised on a jack and wheels straight, I couldn't see anything creating problems. However, I popped underneath the next morning (having drove home from friend's place where the...

Tried to upload a pic or two but apparently will have to learn how! I think I got two pics below... please let me know if it doesn't work...

I just installed the PACBRAKE airbags on my 2010 3500. Was dirt simple and required no drilling, have not yet towed fifth wheel to describe ride (that comes next month), but as far as ease of install the bags were as advertised.

I have exactly the same problem WRT the FOB functioning. I often remote start the truck - which locks the doors. Then, as I approach the truck I beging pressing the 'unlock' button, sometimes it works right away, other times it takes numerous button presses to work. I think it works better from...

BurlesonR, I agree completely with what you suggest about towing and protection, when I get my fifth wheel I will likely get a hitch mounted guard or similar to add protection.

I just installed the Husky Liners from GENO's - fit perfectly with my flares. The SRW guards required one hole to be drilled to add the third anchor point, but I did not have to remove the tire to do so. I recommend!

Have a brand new 3500 Laramie Crew cab - does anyone if it is possible to program the lights for 'daytime running'? I didn't notice that option in the literature anywhere. Thanks in advance...

'Sup shipmate!!