Search Results for Query: *

This is what I installed in my trans. 2 yrs. no problems. https://www.dieselperformance.com/shop/product/1060605-valve-body-electronics-upgrade-kit-dodge-2000-2007-47re-48re-transmissions-904

The owners manual states that you can use the same oil for 15,000 mi. if you change the filter at 7,500 mi. with light duty use.

I have replaced the injectors and #1 came out coated in heavy carbon. I'm talking chunks fell off the tip into the head when I removed the injector. I made the test tee/orifice and ran the test on the highway. Running up a small grade, with the truck in tow haul mode, boost at 27 psi. and the ac...

Has any one been using the LF9028 oil filter? How often do you change the oil and or the filter? :confused:

82,000 mi. just pulled them out and installed BBI 0.5 towing injectors. Old injectors, #1 leaking and loose and #3 cracked the top. Truck idles like it did when it was new. I have 3 fuel filters and use Power Service fuel additive.

I have the techni-cooler kit. That includes the intercooler, monster ram, boost tubes and parts, I tow a 15,000 lbs 5th wheel. I did not want crazy power. I have the 75hp Economind tuner and exhaust brake with the monster exhaust. This setup is at the limits of the stock trans. Ohio also has...

I asked this question because I looked at the 2014 Ram 2500 and it seemed to me that the offset of the rim was different. Looked like the chrome clad rim was flatter and the center cap was shallower. Has any one had the chance to measure or test fit the new rim on the 3rd gen truck? Is the hub a...

I see that the new 2500 have 18" rims on them. Can the new 18" rims bolt on to a 3rd gen 2500 without wheel well clearance problems? Is the bolt pattern the same?

Well, it's been over a year. How are the 6. 7 H. B. holding out on the 5. 9 engines. Any problems? Improvements with age?

Thanks for the link. I ordered mine as soon as I read you post. Great deal. Thanks. Looks like the cover will clear the spare tire on the short bed truck.

Here is the quality you get with a Toyota. http://www.youtube.com/watch?v=GJZVUnOduH4

The electrical grounds are corroded. As the body flexes, the ground part of the circuit is adding resistance to the circuit. clean all ground connections to the body.

what dealership did you get the lenses from?

I have not broke an injector line. I have started buying them at Bridgeway Cummins By I-271 and Forbes. If and when the first one brakes, they all get replaced. My brother has gone through 3 #4 injector lines from Dodge. This last one I sent him to Bridgeway Cummins to buy the new style, and no...

I just had my new clear cab lenses delivered. I looked up the bulb size needed for the 2011 Ram. The new clear lenses use a 194NA bulb. The 2007 amber lenses uses a 168 bulb. The difference is the 194 bulb (NA is an amber colored bulb) is 1 watt less and is "cooler" operating than the 168 bulb...

Do you like the truck as it is (beside the 3. 73 gears)? I don't think you will have a big difference in towing with the auto trans and 4. 10 gears. Your trailer is only 11,000lbs. The programming in the trucks modules will keep the engine at the correct rpm for the load conditions when towing...

When my truck had 40,000mi on it, I adjusted the valve lash to . 008 and . 018 in. There was no difference in how the truck ran or idled. I set the lash back to . 010 and . 026 in. Truck still ran the same.

From the 2007 service manual HYDRAULIC BOOSTER The hydraulic booster uses hydraulic pressure from the power steering pump. Before diagnosing a booster problem, first verify the power steering pump is operating properly. Perform the following checks. Check the power steering fluid level...

Friction modifier will ruin the Trac Rite differential. This differential has no "clutch" material in it for the friction modifier to work with. The "shoes" that are used in the Trac Rite will not engage properly and cause all kinds of noises.

If this problem started after the last repair, then my best guess is that there is air trapped in the condenser causing high head pressure that the compressor can't overcome until the truck is moving or you have the engine at 1,000 rpm or more. I just worked on my ac and found that my ac was...