Search Results for Query: *

Thanks for the replys guys... . Overall I'm just looking for some newer rims and wheels than the stock ones. (the chrome is starting to peel off the steel and I've got to get tires SOON). Any suggestions on something resonable yet sharp looking? Not looking to showboat too much, just wanna...

Interesting..... I've been miss-lead then... . I guess thats why I'm asking others... . to get allthe facts... . anyone try to use adapters?

I've got a line on some stock 99-03aluminum ford wheels... . Just curious if they will work on my 97 2500 without messing with grinding the rear drums, or front joints... I know the bolt patterns are the same. Anyone have experience with these?

I'll try to post a pic..... the more research I do... it points to the shocks..... I've never done those on a truck..... are the tough to replace? What would be a recommendation for a decent shock... .

So I was checking out the tires on my 97 2500 this past weekend... I noticed a very strange uneaven wear on the front driver side tire. It has a very strange cupped/spotted wear on it. Wheel bearings feel tight, and so do ball joints. just curious if any others have experienced this... . for...

GAmes: It looks as if that might be the way to go... it also looks like it will make fuel filter changes much easier... SRay: id be interested to see your pic with the 4x4 stuff in the way... .

fuel level so... I havent had a chance to really dig into this yet... but I did fill up the other day... . the past few days, I havent had a problem? So I guess I have a problem with my fuel pickup... . time to research that a bit... . any suggestions on replacements if that is infact my...

from the bottom I've had luck going at it from the bottom... . remove the starter (3 bolts) and you have pretty good access. Just make sure you disconnect the battery(s) so you dont get a jump. Again replace the Lift pump bolts with studs is a great improvement... .

thanks for the info so far... I did also forget to mention, I removed the pre-heater... . so that eliminates the problems that are typically caused by the 1/2 elbow leaking and craked heater bowl... . I'll re-check my hoses... . make sure they are all tight... I'll post an update. Just...

Updates? I'm currently having the same problem... I'm researching it now on this site, but if anyone has any suggestions please feel free to point me in the right direction. I'm thinking that I need to check the solenoid. It seems as if it starts right up, then stalls out after 10 sec or...

its too hard to try and push the plunger in and use the bolts, most guys install studs, then you can put it on with lock nuts. Look up installing the lift pump on this forum, they will have the correct stud size, and you can install/remove much easier that way!