Search Results for Query: *

'02 RC 4x4 . . . Went from the OEM 2 bulb system to the OEM 'Sport' system. Daniel Stern heavy guage wiring harness/relays. Good upgrade, well worth it.

Has anyone made a bleeder valve to replace the 1" plug on the 24v head? Chasing bubbles would be much easier with the bleeder. Thanks

Have a look at the pics in an earlier post. 'Coffee not included . . . .' Dec.18th/2020 This is the console from a 2013 Dodge. Three cup holders, compartment under the seat, outlets for various electrical gizmos, nd can be installed in 40 min.

Advertised compression ratio is 16.3:1 for the standard issue Dodge/Cummins, and 17.2:1 for the HO version. Is this CR bump done using a thinner head gasket ?

Daniel Stern . . . sport headlights, heavy wiring, and relays. Can drive at night now.

'02 5sp . . . .

Would the OEM battery size be 31 ?

Have done this also . . . . did cut the new seal to make the gap bigger, then glued a larger piece in. Still works great.

Have done this for both trucks and my quads.

The brass handle you see for the OEM floor cup holder is a shortened .30-06 casing. The OEM one was broken off.

The Province of BC has gone over to a Resource Road (RR) system on public and private logging/mining/Forest Service roads. Thirty five channels, with the posted channel (eg. RR # 12) at the Mile 0 point. Very much safer for all involved. We used VHF constantly while working in the bush.

The one pictured is an IC-F320 The one in there now is an IC-F121

All should be 'cold' settings . . . .

Thanks for the heads-up Scott . . . all's good!

Also running 285's . . . . . You have a great looking truck. What radio are you running . . . . VHF ?

Is it plugged back in to the module after adding the jumper?

From a 2013 Dodge . . . compartment under the seat with radio/stacker cutouts? Three usable cup holders, and has built-in ports for USB/Accessories, etc. Uses two existing mounting holes, drill the other two. Mounting about 20 minutes. Is a better height than the oem consul.

Just received the Dorman Sport headlights . . . . have ordered Daniel Stern's pre-made wiring harness, and DRL module. Have a question . . . . To disable the oem DRL module it has been said that the wiring for pin #3 and pin #6 have to be joined. If the wiring for these pins is cut and joined...