Search Results for Query: *

Yes, after tow bill and $1600. 00 for troubleshooting and new ECM, but it's running and thats what counts.

Well here it is. After replacing fuel tank sending unit, pusher pump and injector pump, checking all wiring, etc. bleeding injectors no less than 15 times----it was my ECM that had gone south for the winter. New ECM and truck runs like a champ.

Well here it is. After replacing fuel tank sending unit, pusher pump and injector pump, checking all wiring, etc. bleeding injectors no less than 15 times----it was my ECM that had gone south for the winter. New ECM and truck runs like a champ.

I just went out and tried it again with no luck and for the FIRST time in months of trying to start it I got a P0102 (tps) error. What gives?

Ive tried everything and it still doesn't start. Called Dodge dealer in Hagerstown and am having it towed on Tue for them to troubleshoot. Costly tow bill and troubleshoot fee but dont see any other way. As a follow-up I just went out and tried it again and got a P0102 (tps) code. This is the...

Can too much fuel pressure from pusher pump to injector pump cause it not to start? I put new carter pump on truck and after bleeding injector pump and injectors (it still wont start) it buries my fuel pressure gauge (hooked to schrader port). Dont know if I need a pressure regulator or I'm just...

Replaced injector pump and still wont start. Have fuel to the 4 injectors I'm bleeding and now got a 1694 code. Am at a loss.

I have a 2001. 5 HO with Luks clutch and had same problems initially. Ended up changing slave cylinder (larger) and havent had a problem since. Changed in 2003.

Went out and put all the parts back on it, hooked up batteries, had daughter crank it over while I bled injectors again and still no luck. Will pull crankcase position sensor today and see what's up. Are there any tests for it to make sure its working correctly?

If you are " top dead center", the it must be in time.

Going to try bleeding injectors again this weekend after I put all the parts back on that I took off to examine the ECM. Hope it works this time. I have cranked enough to recharge batteries twice. Disconnected negative cables two days ago to make sure computer is completely brainwashed when I...

Removed enough parts to get to ECM and nothing visually looks unusual. What checks can be performed to see if its bad?

Thanks for the help. Have to check for loose or corroded connection as suggested. Nothing else worked. Still wont start.

Hi this is John Styer. I'm back from Texas and just rejoined tdr under the handle Cumminspower2001. My truck is giving me problems right now. Don't know anything about what is happening with the old mason dixon tdr.

My aftermarket carter pump finally failed after 11 years and truck quit. Installed new pump, bled injector pump (got fuel) bled injectors and got fuel but truck refuses to start. No codes on code reader but odometer gave me the p1694 code. Any suggerstions on what my next step should be? My...