Search Results for Query: *

thanks so much for your advice Cerberusiam,just to keep in file,where is a good place to get injectors,i know every online diesel shop has them but i also know not everyone sells the good bosch ones.

i bought the truck with 150000 miles on it and since then i heard that light ticking noise.is this something i have to do right away or could i use it till i gets really bad?

no smoke that i noticed,i dont think i ever floored it though.i still have the oem exhaust,with the catalytic thing i guess.the only other thing i can think of is a light ticking noise between 1900-2000 rpm.i going to use it this week on "stock" program,check the smoke,pour some injector cleaner...

there are no refineries on the island,except for biodiesel,which i would like to hear your opinion. there is no dodge dealer on the island,i dont know any diesel shop that i can trust.last month my truck stall close to the "ex dodge dealer" so i left the truck there,they changed the fuel...

i just put the smarty back to stock and the step dowm rpm's are still there,i even test on setting # 3(performance) and it feels like it was doing it but less,or at least not worse. i have a case of amsoil "diesel concentrate" cleaner,should i use it since i already have it? yes i bought the...

is that bad the airdog pump?my oem pump fail after 6 months and lifting the bed by myself without a hoist was not fun.i had to put the pump somewhere else.is the fass pump more reliable?

i noticed idle is not smooth,when in neutral o park if i press the accelerator for a second,rpm's go up fine but when i let go the pedal rpm's stay up for a second and then come down in steps.last month i changed the apps sensor and when i was finish,i test the truck and this symptom was not...

thanks p-Bar,that bracket looks well made. do you have the battery bracket or the engine bracket?does it leak oil over the exhaust manifold when you change the filters?thanks!

i just bought an amsoil bypass filter with the full flow and bypass filter and was making so much noise,i mounted it under the pass. side to the frame. the hoses seem to be too soft for the pulsating oil pressure . i had to take it out, i couldnt live with that noise. i hate when i buy some "top...

check rockauto,very good prices and different brands to choose.

mine doesnt come on ,but the fan is still good,i did this test and it engaged correctly. but my truck gets to 215 degrees going uphill,and i wish the fan would kick in sooner. The first test is to check the gray/pink wire for power with the key on. If you have power, take a jumper wire and...

the exdealership want to charge me $180 to reflash the computer.

i changed the ecm not long ago,i would thought it came with all the updated flashes. tomorrow i go by the ex-dealership an see if they can read the ecm and see if that flash is already there or not. thanks Bob.

my truck does the opposite,it doesnt want to come on. going uphill it goes to about 215. on flat roads it stays at 190. the fan does spin but never fully egages,or 80-90% like it should. i did change the fan clutch for a new one and still the same. what is the maximum safe temp. for the engine?

today a few blocks from home the truck started running really rough,i thought it was bad fuel or water in fuel. i barely made it home and drained the water in the fuel filter. right after the truck started fine but 5 codes came up : p0237/p1652/p0652/p0193/p0341. i thought they were the result...

i replaced the transmission range sensor ($23) and now the dash indicator works perfectly,thanks Cerberusiam!

thanks Mike,the old shocks are too soft already. i found this upper rubber mounts : http://www.rockauto.com/catalog/moreinfo.php?pk=1377983&cc=1424641 , in case the oem ones are not there anymore. if these are the oem lenghts shocks ,used with a leveling kit,they are probably max out very...

i already order stock height Bilstein shocks. 34522 is the number on the old ones. thanks.

are those parts that Napa might have or dealership stuff?thanks!