Search Results for Query: *

What does this mean and how to get rid of it, its intermmitant and only shows up on avg.and dist. to empty

While installing new VP44 from Blue Chip I found the relief valve in the fuel return banjo bolt stuck in the open position for fuel to flow through it.I was unable to operate the ball by hand like it was frozen,I emailed Blue Chip about this issue with no answer! The truck runs fine good power...

Thanks for the info.Ill start looking for fenders and wheels now

What do u mean by front extenders? I also have rear disc.

has anyone done a conversion from a 2500 to a 3500 dually? will the front and rear axles work without swapping them out

Light started working after I used a test light on it to see if the case was grounded Go Figure,I mounted the light on the plastic cover on the air bag computer on the hump

Well its been over a week so the Vp44 fixed my truck(YAHOOOO) 19 MPG ave. Since I have adj. valves and changed oil and changed my air filter!

Thanks for the input, I have light oil on my blades but the bearings feel good. Think ill put the factory filter back in now dont need to buy a turbo! just dropped 2500. on new pump from Blue chip.

I have a K&N whats wrong with it or whats a better one it definitely boosted my HP

check out their core return policy and requirements!Most all with the exception of Blue Chip, If theres certain things wrong or corroded inside that you dont know for sure, they charge you the core anyway (how are you supposed to know) easy $$$$ Dont know this but always suspicious just me!

I have a light when I ground the wire from the sensor

JR if their pumps are as good as their install Inst ill be a happy camper!

Details of a bad core! Most others if its wore out dont have to give $$$back Blue chip only requirements were Broken case ,Dissassembled,and something else but I met that criteria and no upfront charge

Just installed warning light and it dosent come on at all is it supposed to come on with key on eng not running

Blue chip has 2 special X pumps one has a new comp. one dont Just got finished with my special X install and airdog pump as of now my problem seems to be gone I hope it stays that way

I pull a load Maybe once a year 20FT enclosed with 4 Harleys in it To Panama City Beach 550 Miles! What Pressure is too much Im sure there is a danger to pump pressure.

I just installed the air dog 100 in factory location and the fuel press. at the vp44 at idle is 13-14 psi and goes to 10 psi at 2000 rpm in neutral but returns to 12 psi while still at 2000 rpm is this a good thing or does it need to be adjusted Mike

been thinking about this all week and figured I think Im going to pull my fuel tank off and check inside,, that way the entire fuel system has been checked .perticulary looking at the sock filter and all lines.I dont know if it has a in tank pump or not I know it has a lift pump on the engine, I...

Bad news electrical plug did not fix my truck Inj.Pump and Lift pump along with a low pressure warning light on the way from Blue Chip!Be here Thursday will install Friday.

No not dodge we have a Cummins repair shop here in Knoxville thats who Quoted the 3500.00+