Search Results for Query: *

Cody pesce

Fixed the issue. On back of cluster is the black square labeled Q5. The solder breaks and just needs re soldered again. Back to new

Hey guys, I got an 04 2500. I was recently having a hard start issue. So I pulled injectors to get tested. Everything came back normal. Replaced relays for grids. Tightened up banjos. When replacing relays for grids i pulled hot terminal. Went to start truck and no display on cluster. Gauges...

Hey guys. I recently had truck in shop for code p0595. Found corroded wire near firewall. Brought truck home ran fine. And ran fine the day after. Today I had it out and came to stop. And had no first gear. I changed the troubled governor soleniod and transducer last year with the Borg wWarner.I...

Its an 04 auto trans with the apps on the left driver side engine.

Sweet. Ill do some tests. Where is the speed control servo located?

Does anyone have any info on p0595 code? i do know its low voltage on the cruise control servo. How do I keep from coming up and does it cause any issues with performance.

Yes. The Rotella gives off nasty smells. I used it when I first bought truck and had to change it cause the smell was too intense. Im using valvoline blue and have had no problems since.

Ya. There's definitely something wrong with this pump. Only problem is that its daily driver.

Hey guys, I have been running pump and what a nightmare! When I got the truck back they had put a new spring and ball into pump. Spring and ball was from and airdog pump. I ran it like that for a few days and then my fuel gauge went to zero. Thinking it was was sending unit, I called glowshift...

Ended up taking it in. When I installed draw straw, I left about a 1/4" under straw. When I filled up that day somehow the bottom got closer to straw and wasn't sucking right. Cut the tub and the noise went away. Then there was another noise kind of sounding like a quacking duck. Ended up the...

I would try road force balance. When I purchased my truck 2 yrs ago I had a vibration. I took had decline replaced, output shaft bearing replaced. No difference, so I took back to dealer and the did specs on EVERYTHING. Everything was with in spec. I had BF Goodrich tires. Took them off and sold...

If its a burnt oil smell, what kind of oil are you running?

that's what I figured but the guys at fass told me to try that, but its doing same thing. Could cold weather be affecting it? It was about -5 last night.

yes, 30psi is fine. I tapped mine into bottom of fuel filter housing before I installed the fass system. will need to install snubber valve to eliminate fuel pressure spikes.

I own 2 rams, what I have noticed with tires on these trucks is that I have always needed to road force balance the tires. Not your standard balance and not everyone does this so you will have to call around in your area. I have always tried to have the normal balance but it has never worked.

that is what I thought because fuel is constantly moving. But I just re primed by just taking off line off of CP3. Every time I mess with filters or crack lines and fire it up the noise Is either faster or slower.

Just Installed fass 095 titanium pump yesterday on my 04 2500. Also Installed the draw straw. Went to fill up tank after Install and noticed pump making a chugging sound. Not very loud. not sure if this is how It is supposed to sound? Called fass tech support told me It could be air and could...