Search Results for Query: *

My air bag light has been coming on and staying on,but only when it is cold and waiting for the wait to start light to go off.When it is warm and do not have to wait long for the wait to start light, the air bag light does not stay on. I changed the clock spring about six months ago.I have a 98...

It could be something quirky. I may try a 98 speed sensor.I put in a 96 to match the axle.ll keep yall posted...Robert

According to the quad 4x4 website all dana 80s from 94 through 2002 use the same tone ring. ....robert

Axle swap abs light coming on The donor axel is a 96.that may very well be the problem. I have went through all the suggestions with no success. Light still comes on at 55 mph.I will check the master cylinder plug in today. Wonder if I could change the abs module in the engine compartment to...

Thanks for the responses. I only changed the rear axle. There is only rear wheel abs no front.I forgot to mention that I did have it scanned and the scanner pointed to the rear abs sensor. I don't have the numbers.I changed the sensor. No change.I did stand on the brakes real hard.I will drive...

I swapped Axels from 3.55 to a 4.10 recently.I have read everything on the web on ABS lights.But my situation is different,it does not come on until I get up to 55 or 60 miles an hour.i changed the sensor on top of the Axel,problem still exist.I did a complete brake job on the new axel before I...

I have a 98 3500 4x4 that I just swapped a 3.55 rear end to a 4.10.Now its time for the front differential.My mechanic buddy is going to do that for me.My ? is, what is the best ring and pinion brand and where is the best place to order from,I also will need the install kit.thanks Robert

I installed those on my truck a couple years ago.I used relays and came off the battery. Good lights, but moisture tends to get inside the light housing...Robert

I went with the 96 sensor because the 96 rear end has fins on both sides of the sensor hole that would make the 98 plug difficult to install because the plug in are on different sides.I just had to cut and solder on the 96 plug that came with the rear end.everything is working well. ....thanks...

This is my first post. I just did a dana 80 axle swap going from 3.55 to 4.10.the speed sensor was broke in the 4.10 axle. I broke the the one in the 3.55 when taking it out. ? Is ,will a 1998 abs sensor fit a 96 axle. Auto zone shows two part numbers .I would rather use a 98 because it will...