Search Results for Query: *

Change the crank position sensor.

My 2017 CTD started doing it on Saturday maybe ever 20 minutes or so it would flash low battery volts. Sunday got worse about every 10 minutes. Used it today every 2 minutes. Called the dealer he can get it in about a week. Check all battery connections and the 250 amp connection all tight...

Yea looking at some kits for 265/70/20 alco Seems no one had longer studs for two aluminum rims on the rear.

It rides the same no difference with the lift in the front. The next problem I see is the running boards, the one on the drivers side is 1" forward of the one on the passenger side. I never noticed it till I put the front mud flaps on. The drivers side flap hits the front of the board and the...

1st photo above is without the lift. The one below is with the lift in.

With the 2" front lift , it pulls the axle over to the right by 1". Ordered a Carli today will be here Thursday. https://www.amazon.com/Carli-Suspension-Dodge-Front-Track/dp/B00YF9TYMW

Got it all done, will have to get an adjustable track bar before an alignment.

Took about 45 minutes to get the springs out.

For how much I tow with it , Not a lot. I would say it is my daily driver. I tow the flatbed or the dump trailer if best maybe 2 hrs a month. I just like the safety of being the bigger vehicle that the average vehicle out there. I got hit in Pliladelphia a few months back with my GMC 3500 Denali...

Was looking to balance the truck out it always looks like it is going down a hill. I wanted a 2" lift for the front seems everyone has either a 2.5 or 3" . Found Procomp #61120 kit called them and the said it will NOT fit . What do they know they only make it. Going to install it later today...

Well if the brakes are operating right at 20 miles an Hr. you should be able to skid all 4 wheels. I see your trailer is a 2002 now 15 years have taken a toll on the drums and magnet. I have a full mechanic shop here for our customers who pull large boats or trailers we always pull ALL wheels...

I can see why you need there rear brackets to mount the real flaps on a DRW the weigh in at 12 lbs each. They are heavy on the bottom with steel molded inside to keep them from sailing and getting caught on the tires. They do not say in the instructions to bend the main metal which attached to...

If you think you have a vibration from a two piece shaft, Take it off and have it checked for balance.

It is made about 100 miles south of me right off of I-81. The dealer I got it from is 2 blocks away from the plant. Had a Hydraulic lift motor go in the first month. They over nighted me a new one. Took about a half hr to change. I really like it, Had 21,200 of sand it Just a bit overweight...

Order the Mounting Kit for the Ram for the rear flaps. I ordered the front and rear on tuesday they will be here on Monday UPS. https://www.sharptruck.com/truck-hardware-custom-fit-mounting-brackets-gb755567 Thats where I found the best price. Front, Back and the mounting was 442.00

I went with The B-wise trailer All powdercoated except the axle's. Has a Spring loaded tarp standard, All aluminum wheels with a spare underneath. You can load a skidloader, Atv, Utv in it and it has tie downs in the trailer. The sides fold down for loading with a small front end loader...

I have a dump trailer I haul stone and sand sometimes with it. About 20K loaded. Then the flatbed trailer I haul the Cat D3C the trailer empty is 7700 and the cat is 16,000 or haul my Case 580 super k that weighs in at 14K . The heaviest is our 65" grove manlift weighs in at 22,450 That puts me...

The problem is it was NOT a perfectly good class 5 receiver. They tried it at the dealership on 3 new Rams 3500 they had in stock and it fit one would not fit the other two. The one it fit was nice and square smooth all the way thru, the other two and my truck when you put your finger in the top...

I don't know where Reese got there information from. I originally bought it for a 2015 F 350 SD. Plugged right in day one. Used it on our 2014 GMC 3500 Denali pushed right in. Just got a 2017 Ford F 550 plugs right in as long as you use the collar. The 2017 ford is a class 6 hitch with a 3"...

Reese 45294