Search Results for Query: *

Replaced the factory sending unit and fixed the problem. I think they left the switch on the block when it went in the tank. I had to buy the special socket for this unit as it is difficult to get to with the engine in. Everything appears to be working well. Thanks for your help.I have about...

Thanks Wilson. I found a plug at the hose shop. it is a JIC 14mmX1.5. Got it plugged, installed everything back and voila! I have pressure. Onto my next challenge. I let it run for a while with the Autometer gauge showing 75 psi at the filter head. Revved it just a little off idle to verify...

57420360

My luck continues. I got the new filter head from Cummins. It has an extra oil outlet port and no plug. I thought it was just 1/4" NPT so no big deal. Upon further inspection it is not. I think it is metric and wants a flared tube, like a brake line. Napa parts guy spent half an hour messing...

Thanks for the input folks. I am now convinced that the pressure regulator plunger got stuck, I lost pressure under load and blew up the motor. I am also convinced that the engine builder then gave me back my new motor with the same problem still there. I called the local Cummins shop. Parts...

Update: I spoke to the builder. They are on about strike 6 with me. They said they never do the priming and never need to as oil pressure always comes right up. Keep in mind that this is an automotive machine shop. They do machining and also assemble long blocks. They do not install engines...

The engine came back to me complete from oil pan through valve cover. Engine oil is a bit high as I expected the level to drop a bit once pressure ran oil to all the places it goes. I think I will drain a little out to get it perfect. I guess we will see what the builder has to say tomorrow.

By the way, John, yes that was my first thought. So I posted my query, then got my wife to drive me around to find a gauge on Sunday night before a holiday. So, I guess there isn't much you guys can help with. It must be that something went wrong with the engine build. The problem is that they...

Autozone oil pressure gauge: $105. Various fittings and nipples from Lowe's in 1/8" NPT to get it to fit: $23. Oil pressure gauge from Autozone showed just about zero. I reved it a bit to see and that did not help. All in this time with idle, then rev, then idle was 32 seconds before stock oil...

I just finished reinstalling my engine. I chose to have it rebuilt by a local shop (Knighton's Automotive machining in Albuquerque). I spent the time to pull it myself and reinstall it myself. On the initial start I find I am losing oil pressure. Yes, I am using the stock oil pressure switch...