Search Results for Query: *

Hello All! What year models did DC but the 53 block Cummins into production? I am guessing '99,'00,'01 or more? Is it a given that the 53 block will crack & leak or are there examples some of these engines running fine? Thanks, Tom

I am looking at a 2000 3500 with an automatic transmission. I have run a '94 5 speed so I am a little unsure of the transmission in the truck. It is a one owner with 165,000 miles. The owner said that 80% of the miles is from highway driving. The engine is fully stock. What can I...

Willys, I would like to see the drain used on the newer filters. I am at the point of trying to find a filter that has the metal petcock valve. My leak is as strong as ever. Where the excess pressure is coming from has me puzzled :confused: Somewhere a fellow mentioned that...

I know this sounds odd but is there a Fleetguard filter that uses a steel petcock inplace of the push in type of drain currently used on our trucks? I have never had the water lite come on in 10 years. Also, to install a fuel pressure gage, do you tee in between the filter and injector...

Here's another question..... what is causing the over-pressurization of the filter? Joe, my truck is a '94. Do you plumb in the gage before or after the filter?

Thanks for the replys! I put a new WIX filter too. The O-ring was lubed up. The leak is definitely coming from the outlet in the valve. I am guessing the OFV is bad or failing. Remember the leak started with the original valve with 215,000 miles. I replaced the valve with a...

I have a leak coming from my fuel filter water drain valve. 1. I have replaced the valve and it is still leaking. 2. Where is the "pressure coming from? 3. Precision said the the overflow valve will not cause the buildup w. i the filter. 4. Is this lift pump an issue? 5. Fuel...

Guys! I am very pleased with the additional power I'm getting from the new goodies but I am not so happy with the added trips to the pump. I am watching my foot too. Not trying run the truck any harder than before the changes. Just so I am understanding to mechanincs of the plate... ...

I am looking into moving up to a larger turbo. My '94 3500 has the WH1C turbo. To go to the HX35 or 40 can this change over occur w/o downpipe changes? Can I use the WH1C housing or not? Thanks guys! Tom Pace

I am installing the kit and have a question on the tolerance needed to hold when re-adjusting the nut that holds the springs in place. The initial measurement was 0. 071" . How close do I need to shoot for on re-assembly? My digital Starrett is coming up . 001-. 003 variance. This...

I am installing the kit and have a question on the tolerance needed to hold when re-adjusting the nut that holds the springs in place. The initial measurement was 0. 071" . How close do I need to shoot for on re-assembly? My digital Starrett is coming up . 001-. 003 variance. This...

I have been riding a year now with the ABS & Brake light burning. The truck brakes OK but every now and then pedal goes to the floor. The searches on ABS/Brake light don't give much info on the fix. Unhook wires and re-install... etc When the vac pump fails is it a complete failure or...

fuel pressure gage, plumbing the line ??? Where do you cut in the tee for this installation?

cardboard template Not that it will help now... . using cardboard, trace the cover or whatever shape in question and punch out the bolt holes... as you remove the bolts insert them into the representative holes. it makes re-assembly much easier. TP

got it out I used a slide hammer and it popped right out. Now off to the seal store! Thx! Tom

Hello All! I have removed the transmission & transfer case as one unit. It worked nice, jack placement is important. I have a SMALL leak on the rear seal and everyone says replace it! I called Cummins Atlantic and the service guy said the speedy sleeve is not used any more. My...

Guys, I am about to install my SBC Con OFE . It appears possible to remove both the transmission & transfer case together rather than breaking them apart. I bought a transmission jack from Northern and it looks like it will work great. Your opinions are appreciated! Thanks, Tom

Hello All, I have sent this question out to two individuals so I thought I would try everyone too. I have ordered a Southbend MU 13-1. 25 Con OFE to go in my '94 3500 5 speed 4WD I am planning on doing the clutch job using a friends transmission jack. Questions: 1. Does the gear...

Hello All! My '94/ 5 speed is stock outside of a 4" exhaust and K&N filter so the cam plate and GSK seem to be direction to go along with a gauge package of course. My question is there are several companies who have cam plates as well as springs kits. I am unsure if they are just...

1994 3500 4 speed I failed to mention my year model , etc. Where do I list this info? TFP