Search Results for Query: *

fuel pressure? When you clamp the return line just behind the overflow valve how high will (or should) the pressure read? Mine idles at 20 and when I bring the rpms up it dips and then returns to only 20psi. Clamp the return hose and it goes to 50psi at idle. Thanks

torque jdooner----thanks for the help :D :D

Can someone tell me the torque spec. for exhaust manifold bolts on a 99 model 5. 9ISB. I have new bolts and new manifold but no specs. thanks Larry

Same clutch on my 96. This is where I got mine: TechChoice Parts Dist Greg MacIntosh, Mgr. Toll free 877-723-0112 -- email address removed -- Some one from TDR (don't remember who) recommended them, there nice people to do business with.

fuel plate http://www.tdr1.com/forums/showthread.php?t=120877 Go to the second pictureof this thread.

BTW, it's a '96 3500. Mike if this is the same hub cap as on a 2500 I have one you can get really cheap. Send me a pm or email. Where is Sealy Larry

Anyone know the flow rate for wix 42790 (napa 2790) and wix 46637 (napa 6637). I was going to contact wix but they want more personal info than the IRS (IRS shortform: How much did you make? Send it!) Larry

fuel plate looks like this #11 TST

Have you checked the a/c compressor to make sure it is engaging? It uses an electromagnet to engage the front face plate with the pulley. Not familiar with this system (yet) but it uses an electromagnet (coil) behind the pulley and probably a relay and fuse, maybe a low pressure switch. You can...

Thanks Thanks everyone for all the replies, help and links. I made a puller to remove the face plate, now I am just waiting for it to stop raining. Sounds like this is a pretty common problem, but mine did go over 200k miles before it broke Larry

B. G. Smith & Redram I used a spanner to hold the face plate while I removed the retaining nut but the face plate is stuck on the shaft. I'm thinking there should be some kind of puller to break it loose. Two of the three spokes on the plate are broken and it never completely clears the pulley...

Any trick to removing the a/c clutch face? I don't have the special tool, I don't even know what the tool looks like. :confused: Larry

I had the cat off my 96 and the only thing inside was one screen type baffle, not at all like the cat on my jeep or car. Is this normal or should there be something else? Nothing seems to be burnt out. Looks more like a spark arrester. Larry

Scott Thanks for the help, got it back together. Have you got any pictures of your stack? I think a single 5" would look great. James

I just pulled the injectors out of my 96 2500 5 spd. I had them popped and got new crush washers, but no one knew the torque spec. for the hold down nut. Can some one help? I ran a search but did not find it. Thanks

smoke How much boost do you get at higher rpm? When stock mine ran 22 lbs, when I installed a TST #11(stock location) it came with a new wastegate fitting that brougt the boost up to 34lbs. Low boost and high fuel = smoke If you are not getting enough boost, check your fitting, tubing, and...

Fire dog must have gotten a fire call!;)

I recently installed a #11 TST plate in the stock position and AFC spring kit foward and 34lbs boost. Lots more power but now I get more smoke at low rpm than I want when pulling a light load on a 16 ft. trailer. I backed off the star wheel some and got more smoke but lighter in color. I use a...

New one on me What is a valet switch ?

CClemnts Where did you get your speedliner installed? Mike Ellis Where did you getyour line-x installed? Roberson---Cleburne, Tx.