Search Results for Query: *

While this wont solve your problem my old 01 only had a cam sensor no crank sensor I forget which year that changed perhaps 2000. No idea if they brought the crank sensor back for the 3rd gen trucks. However mine would start, then run somewhat rough at idle, had very erratic rpm readings, it...

I have not read all 21 pages of this thread so what I type from here on may already have surfaced previously in this thread I found a source that said the new engine is using a CP8 and then ran across the below though it is google ai generated Bosch CP8 injection pump is considered a newer...

I cant remember for sure but I think my 96 had a class 4 and I know my 01 had a class 4

That is odd. I have the regular duratracs 275/70/18 and they are 3 peak rated. Looking up the duratrac rt on tirerack and it states the RT's in 275/70/18 are 3 peak rated. In fact they have a picture and it shows on the tire as you can see it that it is 3 peak rated, however the tire size...

Just a very quick look at those codes online the 0483 has to do with the cooling fan, 0868 is low transmission pressure and the 1757 looks like it relates to the governor pressure, though a couple areas mentioned it may actually be more the wiring/connector to it than the actual governor. As...

I went with the max care 7 yr 125k miles., $200 ded At least at the time they would do a 8yr 125k miles but I know that I will get 125k before 8 years and quite possibly before 7 but we will see. Now I can’t remember who went through Ziegler, moparmdirect or Chrysler direct. They were all...

Montezuma Utah, if it is the same one I know of, not far at all from the Colorado border nw part of the Navajo Reservation talk about middle of nowhere, not much going on out there. Have driven through there many times cutting over from Cortez CO to eastern Utah. 200,000 lbs wow that is...

The sport lights are the way to go. Years ago when I converted my 01 it was either Depo or Tye brand that I used cant remember now. 15 years later they are still working fine. I think I bought them through Genos Garage. For the harness I ended up buying one from Daniel Stern. It was a top...

As you mentioned the Cherokee reliability was a concern of mine. We know two people that have them one no problems the other plenty of problems. Checking their reliability ratings at a few places such as jd powers, consumer reports etc they all at least the few places I checked had them ranked...

My wife and I were looking to replace her 4 runner a couple months ago. She wanted to take a look at the Jeep Grand Cherokee. I stopped for a few minutes on my way home from work to just take a quick look make sure I didn't see anything glaring that I didn't like about it (was hoping for that...

Yeah it is funny how they start adding up. I know we started with a small 10' utility trailer for the llamas then added an atv, and more llamas. The utility trailer was getting to small for the llamas and the wood sides were a pain to take on and off and it still had no roof so then we got a...

Way back when, when I did the sport conversion on my 01 I went with TYC. I think I got them through Genos but perhaps not it has been quite a while They were fine and are still working today at least fifteen years if not longer.

You can add one more to the list. My 01 had 375k on it when I sold it to my brother in law. Rv 275 injectors, cam, upgraded turbo, afe exhaust, smarty, edge juice, DTT transmission, replaced the lift pump to a 12 valve mechanical one when I changed the cam that had a fuel pump lobe on it...

Agree with GAmes. No need to do anything. Regardless of what you have been told or read on the internet about vp44 fuel pressure needs. If you are getting 9psi and only drop to 8 psi at wot. You are totally good. The VP just needs positive pressure doesn’t really matter how much as long as...

As John said 4:10s would be good. I had an 01, I had built it up to about 400hp and 900tq. It did have the 3:54 gears and a good built transmission. It was actually built in BC by Bill Kondolay of DTT transmissions way back when. I live in Colorado and had no problem towing our 10k 5th wheel...

The hvac highway mentioned above may be very valid. 30+ years ago I picked up a car. Driving it back from Connecticut to KC. Driving down whatever interstate highway it was through NY city and all of a sudden a freaking mouse jumped out of the ac vent into my lap. Once I exited the highway...

I don’t disagree with anything said especially the weld lack of penetration. Or that it shouldn’t have failed with those skids on it. Was just pointing it out. I own 2 dc trailers. A10k dumper as well as an LPX equipment trailer at 14900 gvw it is an 18 footer. Both of them are bumper pulls...

Don’t get me wrong that is certainly not good and am not meaning to defend DC however both of those skids are over 10k weight the sticker shows gvw of the trailer is 30k and it’s empty weight is 11600lbs so at least in that pic it is overloaded. May not get much warranty coverage with that

I had a dual bypass on my 01. I used the amsoil filter setup. At the time there was a member IIRC his name was Jleneord or something like that he was a machinist and was from Connecticut. Though it has been over 20 years since I purchased it from him. He made a mount for the unit that hung...

I had a set on my 01 They were on for over 300k miles and in fact are still on as far as I know, sold truck to BIL no idea how many miles he put on it since I sold it to him 7 years ago. Were they worth it? I guess I cant really say for sure though for whatever reason (rationalization?) I...