Search Results for Query: *

Thanks for the replies. I took it to the dealer and he didn't find anything wrong with the electronics, so I called Bill K. to recommend a shop as close as possible. He recommended a place a couple of hours away, so I called and got an appointment for next monday the 20th. I'll let you know what...

Thanks Wayne's World, I'm scheduled monday to have the electronics checked out at dodge. I'll post if they find anything. Clint

Inarush76, What do you think is the source of the problem? Clint

I don't know what you mean to check resistance from the computer to the trans. The voltage when using the toggle is 13. 5 which is the same as the middle wire. The pressure on the od port reads 0 till about 45mph then a steady 34 psi. thanks, Clint

The tc locks with cruise and od off. On the shifting, light throttle is quick and firm, wot is firm but the shift points are a little high at 2700 rpm. Clint

I ran some more test today. When i flip the switch between the 12v and front wire i don't here the solenoid click. With the engine on i have 13v at the front wire till i get to 40 mph then it drops to 1v, the rear wire drops to . 2v. I also checked my line pressures. The middle line is 70...

James, I have 12v at the center wire. I have 36 ohms at the pins. The wires inside the pan look good. Roger, I was careful not to let the adjusting screw go in when securing the lock nut. Later I even backed it out a turn and drove it for several miles to insure the front band wasn't to...

James, I attached a wire to the front (brown) wire and ran it to a switch, from the switch to chassis ground, and flipped it on at 55 mph. I understood Bill K. to say this would by-pass the electronics. Nothing changed when i did that. Could some debris have gotten knocked loose when i...

I have a 94 4x4 that I had the transmission rebuilt 1 year ago. At the time I had it rebuilt I had them put in a DTT vb/tc. Last week I adjusted the bands and after that I haven't had overdrive, everything else about the transmission works fine. I'd called Bill K. and he told me how to check...