Search Results for Query: *

I have a 1995 ctd 2500 and i recently came across a 1995 ram 1500. Will the body parts all inchange. I also heard the frames were the same in the 1500 and 2500 in these years. Are there any other cautions i need to take in inchanging parts on these trucks.

I have a 95 ctd. I just recently learned about the timing slipping on these trucks. Mine hasn't been done as far as i know. I have the star wheeled turned with a #5 torque plate and the afc and plate all the way forward. where should i put my timing and what was it from the factory. Is there any...

It is throwing trouble codes P0645, p0500, and p1693

My dad has a 2000 ram 3500. Every once in a while you will push on the throttle and there will be no response. If you let off the throttle it will come down and if you shift down and get back in it it will be fine for a little while. I say it is the throttle position sensor. After reading an...

Hello guys. I live in Pennsylvania and i have been herein things bout these green weenies (environmentilists) wanting to take the sulfer impurities out of the diesel fuel. I here this will cut the MPG in 1/2, the truck won't perform as well, and will hurt the overall life of the engine. Is...

Here yesterday on my 1995 ram ctd it started starting really slow as if the batteries were dead. But it started so i ran it down the street and back hoping that it would charge the batteries and everything would by fine but it natually it wasn't. So today i go down to the store and get two new...

I have a 1995 ctd. I just had a problem with the u-jiont on the back of the rear driveshaft. It was spinning in the yoke and wore the little teb off that halds the cap in place. So i had to get a new u-joint and a yoke. I come to find that the new u-joint in spinning in the new yoke. So i bought...

Yep thats wat i'm talkin bout. I found a factory one for $285. Like to find a used one but i need it back together. Thanks for the Input.

Here recently i was driving my 1995 ctd 4x4 down the interstate round 70 mph. At this speed the universial on the back of the rear driveshaft lost a cap due to the fact it was spinning in the yoke and wore the little tab off that is supposed to hold the cap in. However this isn't my problem...

I've recently been having trouble with my shut off solenoid. I would like to find someone who sells pull cables. Either that or someone who has new solenoids that are cheaper than mopar(by a good bit). The whole poppin the hood thing is startin to get old. Any other suggestions would be...

yes i do have a boast gauge. It can make upwards of 30 PSI if u keep ur foot it it. Where is the most common place for leaks and i can check. There might be a slight power difference but not very noticeble if there is. The air filter is clean and new. NAPA 6478 gets a good bit better flow.

I have a 1995 ctd 2500 5 spd. when we got the truck about a year and a half ago we thought it ran really good and it still does. it is suposed to have about 310 hp. (I know not quite enough) :) Anyway when we pulled the trailer with it on the high we never seemed to have a problem with exhaust...

I have a 1995 dodge Cummins 5spd. Here lately I have noticed it to be running sluggishly. The problem kinda comes and gos. The other day I was driving it and the problem never went away. It wouldn't make over 10 lbs. of boast and the pyro was really cool. It isn't the air filter or the fuel...

I have a 1995 Dodge Ram. A while back the return spring on the throttle cable broke (the small one towards the top of the pump). We put a new one on and then the cable started to stick. So we put a heavier spring on. It still sticks and I don't know wear the problem is. It isn't the cable...