clutch

Hey Guys, any idea on the electronic side of things when converting a 2021 5th gen from 68rfe to g56? I just toasted the 68 and buying a 4th gen with a g56 is not an option unfortunately. I know how to mount everything mechanical. Wiring and tuning is what concerns me. Is it do-able? You know...

Three times since May I have been up at high elevations and noticed that my clutch is failing only to have it return to perfect working order when I return to sea level. At first I thought it was heat related because I was pulling my 8k bumper trailer up the passes and while I’m sure heat is a...

So I’ve noticed recently that when ever the hill start assist is engaged on an incline, it won’t disengage just from letting off the clutch. A few times I have let off the clutch and gave it gas but nothing happens and then when it finally dis engages after a couple seconds, the clutch is half...

Hello all, I'm hauling this load up to new York and then on to Maine. It's time for a clutch replacement. The throwout bearing is screaming at me and since I'm going to do it, may as well replace the clutch. So, may i ask you all your suggestions for the replacement parts? This is Ram 3500...

Brand new, never used or installed. Asking 1075 OBO. Contact with offers or shipping quotes.

I have been chasing an engine vibration in my 05 4x4 6spd H.O. short bed quad cab for about 6 months. It varies but most noticeable at 2,000 to 2,400 rpm and at idle. Truck has 135K on it. I tow a 6 ton equipment trailer and plow with it. Had an injector coil fail around 90K and replaced that...

Twice in the past week after sitting at a light, I let out the clutch to go and the grab point was 1-2 inches closer to the floor than normal. It was very disconcerting because the clutch grabbed sooner than I'm used to and the truck 'leaped off the line', so to speak. I believe this happened...

I just had my getrag rebuilt, installed it and noticed a small clicking/rattle noise in every gear and neutral with the clutch completely released, the noise will go away with any clutch pressure or if I hold on to the fork under the truck, the slave keeps a small amount of pressure on the fork...

Hello All, I just returned from a 6 week business trip and tried to use the dusty rusty 99 Green monster to move some equipment in the yard. It started right up despite the many weeks having been parked. Unfortunately as I backed up to my car hauler the slave let go again. . #@$%! So, is...