suspension

As it says: 2013 DRW crewcab long bed. I had a set of Ironman A/T's 20", LT275/65R20 126/123/Q with bilstien 5100's all around, I ran empty around 60-65lbs air pressure rear & 65-70 in front (empty except the 50 gal aux fuel tank & 350lb 5th wheel hitch) The truck rode awesome, I have about 40k...

Hi there! We recently got an in-bed truck camper (Scout Olympic - dry weight 1154#, expected total payload max 2500#) and have it on our 2021 2500 (4x4 6.7L Diesel Turbo I6 - standard coil suspension). The truck generally handles very well, but at higher speeds (and if the camper is top heavy)...

I have a 15 3500 Regular Cab 4x2 DRW CTD. I was looking for a better ride and for the truck to be softer on my rig when towing. I have looked for reviews and they are few and far. Any real feedback or even suggestions would be appreciated. Here is a link to the product...

Anyone know if my 1992 12 valve will 250 2wd engine and mounts will bolt in to the 82' w350 frame? Will the stock springs up front need upgrades even though it's a 1 ton ? With the 12 v going in What's the Max tire size I can run with the stock suspension? I may do a lift kit . Would...

My truck is a 2003 dodge ram 3500 5.9l diesel CUMMINS 4x4, with 248k km/154k mi. gear steering and solid front axle, quad cab. Laramie i think? its got leather and power everything alpine stereo Im new to the ram world and this truck needs tlc but i cant even figure out which ball joints i...

So, I decided to do a 2" to level the truck, and since I was adding air to the rear, could control the truck's level with loads.. and as I typically do, it led to all sorts of other things, including the control arm replacement with slightly longer ones to keep the proper axle geometry. First...

I have a set of four Fox 2.0 with reservoir shocks for sale. These were part of the Carli Backcountry suspension I had installed. These will only work for a truck that has been lifted, the Carli system raises it 3" in the front and 1" in the rear. The two front shocks were used for 23k very...

I've recently been doing some R&D on a totally new front end suspension system for a road race vehicle we are building. The base platform was a 95 2500. We made it a short bed single cab and back halved it to tuck 20 inches of contact patch inside the body line on each side. We got rid of...

Im considering adding a front leveling kit to my truck when I replace the shocks. It’s an 03 with almost 300,000 miles and it’s sagged a little, but not too much since new. I’m debating whether to go 1.5” or 2”. I’m going to install a heavy duty bumper as well. I run 315-70-17 tires. Thanks.

Hey y’all. Looking to replace my front sway bar bushings on my 2006 Ram 3500 4x4 SLT SRW Mega. I took the truck to O’Reillys to grab replacements, but all they had in stock was rubber. I’m looking to get polyurethane or some other type of thermoplastic so I didn’t get them yet. There’s 3...

Has anyone experimented with adding leaves in place of the spacer on the '14 3500?

Hey everyone, I've suddenly got a severe shake felt in my steering wheel while making a right turn, and to a lesser extent a left turn. It is most prominent while making a turn at speed. Based on the searches I've made of our forum it sounds like I might have a u-joint that has, or is failing...

Hi everyone! We would like to announce that Hellwig will be hosting a Liquidation Sale for select 2600 lb. Air Bag Systems. These bolt-on kits help level your truck, and improve handling while towing or hauling. Thanks to the large 2600 lb. capacity you can run less pressure than other smaller...

You guys all know a lot more than I do so I like to confirm tumors with you before I go spend money. I've got a 2008 6.7 Cummins. It rides ridiculously rough. My family hates riding in it. My buddy and I looked at the coil springs and they are stock but he noticed that they have one more coil...