tps

Hi guys, my first post! Anyway I have a 98 Dodge 12 valve automatic transmission. I am having issues with the throttle linkage. On my scanner the TPS is reading 59% at WOT and about 6.7% at idle. I took the tps sensor off and with a screwdriver I verified the tps is showing 99% at WOT but when I...

1996 Dodge Ram 3500. Automatic. Problem -Not Shifting into overdrive. A while ago sometimes the truck would not shift into OD and other times it worked fine. While messing with it I found that while driving down the road and it would not shift into OD I could put the trans in neutral , turn off...

I have had this issue for around 6 months or so. I will start from the beginning... Rebuilt transmission 1 year ago. 5-6 months later no lock up. Tested alternator Cleaned grounds Monitored transmission via snap on scanner Wired in lock up switch Added noise isolator Tested...

I have a 96 C/C 4x4 AT. Tonight when I left work the transmission wouldn't shift into overdrive or lockup the TC. The only thing significant that happened between this morning and evening was a 30 minute hurricane of a thunderstorm but I don't think it has anything to do with the problem. I was able...

Is there any way to reset the TPS system so that it will not flash under 55lbs? I have aftermarket tires that will only take 65 lbs and the TPS warning light is on and the display is flashing. The dealer reset the fill PSI to 55lbs but the warning light still is on and display keeps flashing...

I've been fighting this issue for over a year and after finding it I HAD to share it with the community. If you use a Scout II you really need to pay attention to this: The Scout II does 3 things: 1) Digital gauge pack 2) Smarty POD control 3) Warm-up protection using POD control First...

Working with a friend on his 94 that started the old hunting problem. Searched TDR and of course came to the TPS issue. The voltage from the TPS at idle checks at 350 millivolts. Goes up to a little over 3v at WOT. Cannot find any way to adjust the idle voltage to the 1. 2 that was...

I just installed an ATS Copilot and can't get it to work... I triple checked the wiring and as far as i can tell, it is all correct. I got everything together and started it but I have no throttle response at all... With the unit unplugged the truck operates normally even without jumping the two...