tranny

Ok guys ive got a 07.5 3550 with 325500k and a 68rfe. A week ago i got the p0750 code for the shift solenoid. I did all the resistance testing and volt testing and determined it was the solenoid pack. So i changed the solenoid pack, fluid, and filters. That code never came back but a low voltage...

So I have an 03 3500 ram dually, are these built stock with tow mode? Because when I hit button on column shifter it only goes to O/D off. My buddy has 06 2500 and his column shifter button has 2 modes, 1)”tow /haul” and 2) O/D off. His has 3:73 and mine is a 4:10. So do I not have the tow...

My son's dually has 250K miles on it & needs a full minute to begin moving @ idle, after starting [50 deg.], then is running 'higher than normal' RPM @ highway speeds. He'll get more specifics now that we talked about the need for, well, specifics. I suggested he perform a 'stall test' for...

first off all i have a tripledisc converter + flexplate transtar solenoids..... servo masterkit transgo shiftkit bands :mad: it will not shift upp very good 1 2 is pretty good but i need high rpm to get into 3 and od doesent work or it goes but shift down to 3 again and the same...

I finally broke down and bought an automatic in my 2007 5. 9 maily for the wife and they still scare me like the pre 2003 trannys did. any suggestions to help me monitor it and keep it behind the motor?

for the 48re i need od direct clutch wawed snapring 5. 75inces billet band anchor (not the band strut, the thing on the other end that the bolt push on) billet lever? mine was number 5 why was my snapring in alot of pieces and why was my anchor broken? who can ship it to...

mods smarty tuner deleted kitty htb 62/12 (35psi / going to put up to 50 after new gasket and bolts) flux 2 (100hp injectors) fass 150gph modded airbox t&c cp3 stage1 dodge ram quadcab shortbed 2500 year 2005 my transmission was slipping in 2 gear. . changed oil today and found...

My friend just bought my NV5600 and Southbend dd clutch along with the starter, the adapter plate, steering column and pedals out of my '02 2500 to put in his '01 3500 drw auto. He has it in the truck and driving but I don't know what to tell him to do about the wiring from the old auto and it...

hi now i have some parts in the mail 100hp injectors lifpump 150gph cp3 uppgrade but my transmission wont take this with all my mods i should be around 650-700hp on crank i know i will get over 500rwhp before i had 429rwhp so my question is about trannys and torque converters singel vs...

Lost transmission out on I-30 just west of Texarcana TX. Had a rumble from transmission tunnel... gear shift slammed out of 6th back into 5th. Pushed clutch in, put in neutral and coasted to side of highway. Loud grinding noises if I start truck and release the clutch. Dodge dealer says not the...