Here I am

wiring

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff
  1. Bill Strand

    2nd Gen Non-Engine/Transmission Clockspring options?

    Hey guys, I have a 2001 Dodge 2500 5.9 diesel. A few months ago, the airbag light came on. Cruise and horn not operating. I troubleshot to the clockspring. I just installed my third one and it's bad. The issue is the ribbon wires are too short. Two different manufacturers, same issue. Dorman...
  2. WalterJ

    Where/how did you install on board air compressor. Advice/tips most welcome.

    Just purchased a new Viair 35033 350C air compressor to be installed on/within my truck, as a permanent fixture. I'm thinking to install it in my bed, nestled next to my 53 gal. RDS fuel tank. Living in Wisconsin [Winter salting] discourages me from mounting it "below decks." I'm also not...
  3. D

    1990 W350 Electrical issue

    I've had a 1990 W350 for about a year now slowly getting it road worthy from its retirement behind a barn and I've had an electrical problem since I got it. It seemed at random I could loose all ignition power and only have power to things like the door buzzer. It can take everything out at...
  4. F

    2nd Gen Non-Engine/Transmission Circuitry...

    Ok so I recently installed some new style headlights on my 01. They come with the nifty led daytime running lights but I don't know where to wire them. I need a circuit or fuse that comes on with the key. I'm trying to not use the cigarette lighter for this mod. If anyone knows what other...
  5. C

    Engine/Transmission (1998.5 - 2002) Swapping auto for NV5600-Wiring??

    My friend just bought my NV5600 and Southbend dd clutch along with the starter, the adapter plate, steering column and pedals out of my '02 2500 to put in his '01 3500 drw auto. He has it in the truck and driving but I don't know what to tell him to do about the wiring from the old auto and it...
  6. C

    P pump tps?

    I know that in order to use my PCS controller on a p pumped engine, I will need a tps. My only question is where to install it and what kind of tps do I use?
  7. C

    Archived Copilot help..

    I just installed an ATS Copilot and can't get it to work... I triple checked the wiring and as far as i can tell, it is all correct. I got everything together and started it but I have no throttle response at all... With the unit unplugged the truck operates normally even without jumping the two...
Back
Top