Here I am

0-60 time of a stock truck

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Will the banjo bolts from Geno's work on a 2005?

Dyno Shops - Diesel?

I recently got a Edge Juice and have been playing with the 0-60 time feature.

My stock truck runs about 9. 03 for a 0-60 time on level ground. If I run the juice on level 1 the 0-60 drops to 7 sec. Nice :) However the tach goes to 3200 and just waits on the truck to catch up. So I dont see any improvements on any of the higher settings, :eek: Sounds like I need a better converter, Do these times sound about right for a Third Gen 2wd?
 
I have seen 7. 6 on the display, running it with overdrive engaged, and I thought I could go faster with overdrive locked out, but it slowed to 8. 0 sec for 0-60. Both times on level 5 Juice/Attitude. :confused: Anyway, I know it sounds slow, its cuz I'm in Denver, but I blame the torque converter. I have been researching DTT and the like, and it sounds like money well spent, then this engine could truly shine.
 
7. 6 doesn't seem slow to me. You have thin air and you also have the 305/555

motor. The torque converter is what I thought also. I am going to a shop day this weekend and plan to discuss this there.
 
Now that our juice has been upgraded to the hot juice, i'm gonna give it a try. I've been hearin a few different things about the power it puts out, but it should be 150/350 i think. :cool:
 
Back
Top