1850s barn foundation project

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Members in Albany Ore.

Leno's Tank Hot Rod...

Gene,



Nice project. When my folks moved to our family farm in 1958, a new foundation for the barn was the first priority. The old was knocked out, forms were set. Lots of field stone was set in the concrete as the foundation was poured. That old electric mixer was kept going for weeks on end that summer. I was only 5 at the time, so missed alot of hard work. But there was plenty left as I grew older . . . . .



Don't think that redi mix was even a dream back then.



Andy
 
1958 is about when this one needed done!! Honestly, there is enough field stone around here, that forming and pouring was an option. Decided we didn't want to deal with the forms, and mess with the rock.



I would guess in the 40s this barn/farm was "state of the art", for this area. It had a small silo, with covered enclosed walkway, at the end of the stantions. (milking cow holders for you non farmer types) A concrete gutter. A grainery, Horse stalls, Hay and grain chutes, hay trolley, a cupolo(long gone) Inside drilled well,+a milkhouse with a dug well.



Behind the barn was about a 6 acre orchard, as well as a maple syrup camp, 2 oil wells, and every low spot in the fields had stone ditch drainage.



Ryan,

Fill it with 12V Dodges, so I have enough parts to last me a longggg time.

:-laf
 
Anything left of the sugar bush?



That much sq. footage for storage is pretty reasonable $ with a little sweat equity. Shoot, you've even got a built in physical conditioning program right there. Get some people to pay you to let them exercise while they work!:-laf



BTW, where did all of that cribbing come from? You in the house moving biz?
 
Last edited:
You mean the maple trees?, just a couple, most of the big ones left went down in the last 20 years.

Cribbing? Shoot, nothing $1200 and a trip or two to the local sawmill won't take care of. $6 for a 4"x6" 8' long, hard wood. They will be for sale, at the end of the summer, lol!!

We are infested with small mills in this area, a lot of them Amish.

I call it crippleing, not conditioning!! Most of the block work will be hired out.
 
I've done everything except lay the block, JB Construction is taking care of that(John Byler) LOL. Hes a rogue Amish, uses a cell phone, but has an English drive him around. :rolleyes:
 
Back
Top