2nd Gen Non-Engine/Transmission 19.5

[onestackdram]

This is a stupid question but one I was contimplating.



Would the 19. 5" from a Chevy HD fit on a Dodge 3500? I havent looked very closely or anything but it seems to me that the bolt pattern or atleast close.



I dunno maybe I'm an idiot.



TIA



Russell

 

[Mactruck]

Yes, It should.

The chevy uses a 8 X 6 1/2 bolt pattern like our Dodges.

The only thing you have to check is the Back spacing. Because you have a 97 It may work. If you had a 2000 or above the back spacing would send the wheels about two inches out from the fenders.

 

[onestackdram]

well either way i would not worry about them sticking out too far as I have a flatbed and have a few inches to spare on width.

 

[ronco]

Another possibility for us SRW folks, I see trucks owned and operated by the local railroad with 19. 5 tires and wheels and the front and rear of the trucks have axles and train wheels for riding the tracks. The Suburban 3/4 ton should work if the back-spacing is right. I have seen this kit on an Expedition too, with five lug wheels.



ronco