Here I am

1993 250

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

ABS Sensor and Dual Exhaust?

How to set stock injection timing

Status
Not open for further replies.
I am about to crush my donor truck. I pulled the rear end and the pcm. does anyone need these and does anyone have any suggestions on what else to pull? copterdoc





THIS WAS MOVED TO 1ST GEN FORUM FOR BETTER EXPOSURE AND PROPER FORUM.





BOB - 1ST GEN MODERATOR.
 
What year is your donor? I need a right fender for my 93, and a decent seat. THe original is squatting, even with a cushion, and the fabric is ripped. Pardon me for being ignorant- it sounds like your 93 250 is the Ford? Conversion sounds like a good thing to do to the 84 Ford. PM or email me with details. I will be in Southeast Missouri in a week or so, and may be able to run down and pick stuff up.



Daniel
 
Copterdoc,



If there's a trailer hitch receiver on the donor, or if the tailgate is in good shape, I'd like them.



I'll be in Panama City in a few weeks.



DBF

MDTDR
 
More info

all assuming this is a dodge!



I would be interested in seeing some pics if available!



If there is anything worth money pull it and sell it. Right now good doors are worth their weight in gold.



Looking for all A/c stuff housing, lines, box, condenser, vents, vent ducts, everything. ( i have no a/c stuff at all)



tilt steering column,



cruise control stuff



Power window, locks



Front axle if it is 4x4, springs maybe?



maybe a brush guard/front bumber



interior color? standard or Club cab, could use that stuff if available, I hate the god awful beige/tan/faded my interior has become.



Please let me know, as this is just the list I can rattle off my head.

Stuff I was starting to look for, Spring is just around the corner.
 
Hey coptercoc!



I tried to get ahold of you months ago re: this truck. you never responded so I assumed you'd gotten rid of it.



Anyway, I need front spindles, hubs, rotors (if good), lower control arms. I assume this is 2wd?



What else do you have? It was a complete truck (minus eng. trans. rad and CAC) when you first put it out there for sale.
 
727

Camara



The 93 would not have a 727 rather a 518. A guy local here has a 727 twd for sale. No core required. 900 dollars. Has 45k miles on it since new. It is stored inside.



PM if interested

James
 
well, if it's an early 90's Dodge I could use the whole front clip - I'm very serious - core support, fenders, hood, bumper - whole thing, or whatever is left over, plus any of the front plumbing - A/C condenser, intercooler, radiator, etc. Mine had a misencounter with a Ford Ranger.

- Sam
 
I need a rear axle. Mine is bent 1. 5 degrees.



I just looked at a local truck for $1000. I should probbaly just buy that one, but tell me what you'd want for the rear end you have. If nothing else it will help me justify buying this truck. It is a complete 4x4 except the bed and blown-up automatic.



Sam, I am driving through Colorado this weekend. Call me at 573-424-0089. If I buy the truck, I might be able to bring you some sheetmetal.
 
Down on 'yo' knees Don

It wouldn't hurt to explain how many dollars 'worth' of spare parts there are on the hull and how they don't make them anymore. Don't let pride stand in your way, beg.



James
 
Status
Not open for further replies.
Back
Top