Attention: TDR Forum Junkies I ordered a front hub assy from Quad 4x4 lst week, without tools as I am slowly getting part together to do the disks & pads.
The bearings are 222,000km old and show a minor sign of movement.
Best to replace them.
Quad 4x4 where promt and have good prices with the kit consisting of the hub assy', 8 studs, cotter pin, anti seize, thread locker & brush.
The package came in a TIMKEN box with the lable cut out (no P/N anywhere), which made me courious!!!!
So I checked out the Timken web site & found this:
Timken Automotive Part e-WebCatalog by Vertical Development, Inc.
This is for my 1997 8800lb 4x4.
Timken P/N HA590020.
They also list them from early 1980's to 2007.
Just thought I would share this info.
Napaonline also has the hub P/N PBR930405 for $264. 00 and BR930405 for 284. 00, I could not tell the difference from their web site, both should fit the 97.
The bearings are 222,000km old and show a minor sign of movement.
Best to replace them.
Quad 4x4 where promt and have good prices with the kit consisting of the hub assy', 8 studs, cotter pin, anti seize, thread locker & brush.
The package came in a TIMKEN box with the lable cut out (no P/N anywhere), which made me courious!!!!
So I checked out the Timken web site & found this:
Timken Automotive Part e-WebCatalog by Vertical Development, Inc.
This is for my 1997 8800lb 4x4.
Timken P/N HA590020.
They also list them from early 1980's to 2007.
Just thought I would share this info.
Napaonline also has the hub P/N PBR930405 for $264. 00 and BR930405 for 284. 00, I could not tell the difference from their web site, both should fit the 97.
Last edited by a moderator:
