Attention: TDR Forum Junkies 
Unfortunately my 1990 W250 hit some black ice last winter and bent the frame fairly substantially along with other damage that puts it beyond my capacity to repair. I've been away all winter (and probably just dragging my feet to sell her) but its time for her to go. This forum has helped me a ton over the 15 years I've had this truck so I'd love for someone here to get it if possible.
Details:
Located in Aurora Colorado
Engine:
-1990 Dodge W250 Cummins 12 Valve 5.9
-Odometer says 290k but probably closer to 400k
- I tried starting it but no luck, it did turn over several times but wouldn't fire. Then I noticed a large crack in the starter so haven't tried again
Transmission and 4WD:
- Getrag 360 5-speed Manual
- Rebuilt in 2022, honestly everything was pretty pristine inside except the syncros needed to be replaced
- No obvious damage, am able to smoothly shift through 5 gears and reverse, as well as all four positions on the transfer case
-Front drive shaft fully rebuilt in 2020
Drivetrain:
- Axles, I've never checked but I believe they are DANA 70 or DANA 60s
- Trucks rolls fine if you push it
Steering:
- I believe it is the tie rod that is broken, steering wheel spins freely, but wheels can be turned in tandem with ease if raised
AC: was working last I checked. Compressor/ condenser new in 2010
Body:
- Long bed, Single Cab
- Frame: bent like a banana
- Body panels, hood, tailgate, all at least somewhat bent
- little to no rust
Price: I have no idea, please make me an offer in the DMs, highest offer capable of getting it picked up in a reasonable time frame gets it. I'd like to have it gone within the week if possible.
Details:
Located in Aurora Colorado
Engine:
-1990 Dodge W250 Cummins 12 Valve 5.9
-Odometer says 290k but probably closer to 400k
- I tried starting it but no luck, it did turn over several times but wouldn't fire. Then I noticed a large crack in the starter so haven't tried again
Transmission and 4WD:
- Getrag 360 5-speed Manual
- Rebuilt in 2022, honestly everything was pretty pristine inside except the syncros needed to be replaced
- No obvious damage, am able to smoothly shift through 5 gears and reverse, as well as all four positions on the transfer case
-Front drive shaft fully rebuilt in 2020
Drivetrain:
- Axles, I've never checked but I believe they are DANA 70 or DANA 60s
- Trucks rolls fine if you push it
Steering:
- I believe it is the tie rod that is broken, steering wheel spins freely, but wheels can be turned in tandem with ease if raised
AC: was working last I checked. Compressor/ condenser new in 2010
Body:
- Long bed, Single Cab
- Frame: bent like a banana
- Body panels, hood, tailgate, all at least somewhat bent
- little to no rust
Price: I have no idea, please make me an offer in the DMs, highest offer capable of getting it picked up in a reasonable time frame gets it. I'd like to have it gone within the week if possible.
