Archived 1st gen won't run after pump mods

[matches]

1st gen won't run after pump mods/now runs great-thanks

I adjusted the star wheel one turn CW, turned the fuel pin 90 degrees CW and turned in the smoke screw one turn CW, now the truck starts but won't keep running. Do I have to adjust the idle speed?

 

[matches]

Figured it out, my mistake I only adjusted the star wheel 1/4 turn. I got the truck to run, and it runs great. I just had to keep cycling the starter to get all the air out, I guess. It would run for two seconds then die, but after cycling that for three to five times and feathering the fuel pedal it finally idled, and like I said, runs great. I can easily drive through my clutch now.