2nd Gen Non-Engine/Transmission 2000 stock forged alloy centers

[Dartman]

Did a search, but couldn't find what I was looking for. I found some stock rims http://www.wheels-and-rims.com/cgi-...odid=12459&sid=8LpJDk1EI2mk90z-46105113165.66 to put on my '99, but will need the centers to go with them. Does anyone know the price for the centers from the dealer or MoPars 4 less? Just want tosee what the price is for the centers befor I pay 191. 00 for the rims. Thank you, Tony

 

[Bob Wagner]

if you check out the classifeid section you can get a set of four wheels and cpas for around 300. 00 for the set.

 

[Dartman]

Thank you, Bob. I e-mailed a guy from the classifieds who has 2001 alloys. Are they the same as the 2000's? Thank you again, Tony.

 

[Bob Wagner]

Yes they are. and I am happy to help

 

[SnoKing]

Remember you most likely have to have your rear drums turned down a bit to fit the alloys over them. SNOKING

 

[Mesenbrink]

The front tie rod ends will rub the wheel on 98's and 99's with the 00-02 aluminum wheel. You would also have to turn down the lip on the rear drums.

 

[IC Smoke]

stock centercaps from the local dealership was around 70. 00 PER cap! I had one stolen from a boat launch parking lot #ad
So I watched ebay for a day or two and found a pair for around 30. 00 used but good enough for me!



. 02

Ian



they dont look bad w/o caps either (just rotated/re-balanced and waiting a few miles to put em back on)