Always verify any and all DTCs before you start replacing parts.
There is nothing in the trouble shooting tree for P0215 that calls for replacing the VP44. It's either the relay, wiring in the relay circuit or the ECM.
P0215
Engine control module ground circuit(s) open
Fuel injection pump relay ground circuit open
Fuel injection pump relay
Fuel injector pump relay control circuit open
Fuel injector pump relay control circuit shorted to ground
Engine control module
P1694
DRB not display bus operational
CCD bus (+) circuit open
CCD bus (-) circuit open
ECM ground circuit open
Engine control module
Crappy ground connections is an inherent problem with our trucks. Check and clean all ground connections. The battery posts, at the fender, engine block, firewall, frame... . all that you can find.