Here I am

2nd Gen Non-Engine/Transmission 2001 HVAC blend door actuator.

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff
Status
Not open for further replies.
Trying to help a friend with a 1500 gasser. He can't seem to find the actuator. He claims there are different versions, and he hasn't seen a 3 pin deal like this. It looks like a section of the board is fried. Here's some pics. Any help with a part number or ideas are appreciated.

image.jpg
image.jpg
image.jpg


image.jpg


image.jpg


image.jpg
 
I don't recall how many electrical pins there were when I did my '01, but that sure looks like the actuator exactly as I remember it. I try to not think back of the days of trying to get my big body under that dash to get to that thing, particularly that back screw.
 
What's the dealer say Wayne??? Give me the VIN and I'll go in through my OE Connect site.

Is it a Non A/C truck?? That might account for fewer pins....
 
I'm surprised to see Lucas parts on these trucks, thought that fine engineering was reserved for British cars.

Why do the English drink warm beer? Lucas made the refrigerators, too. (I couldn't help it)
 
I'm surprised to see Lucas parts on these trucks, thought that fine engineering was reserved for British cars.

Why do the English drink warm beer? Lucas made the refrigerators, too. (I couldn't help it)

Yes I had fun when I saw that. Prince of the opposite of desired temp in the vents.
 
What's the dealer say Wayne??? Give me the VIN and I'll go in through my OE Connect site.

Is it a Non A/C truck?? That might account for fewer pins....

The local Mopar counter here is terrible and I don't think he's been there yet. The info in NIassac's post may be good. Trying that first. Thanks Mike.
 
Status
Not open for further replies.
Back
Top