Attention: TDR Forum Junkies 
2004, VanAkken 3. 1C, X-Monitor, AFE Stage 2, 4 inch exhast, 4X4, auto/w/vb, 66,00 miles
Had the body shop fix the booboo on the bed and they took it ( the Bed ) off fixed the bed and put back on and then drove it to a spray on bed linner shop to finish the job... ... truck started and then died at the spray on shop when they went to move it. Cranks and cranks but will not fire,
Codes : 0628 fuel pump relay ciricut low
0335 crankshaft position sensor circuit
0036 crankshaft position sensor performance
2269 water in fuel condition
After thinking about it and looking at the codes could it be a fuse ?
They called and I went down and read the codes and drained a little fuel from the filter there seems to be fuel there, then they wanted to close. Tomorrow I'll try to get it going. . Anything else I should be looking at ?
I did a search and am sort of lost about the lift pump and how to tell if it is working or not ? Thought I would take the Van Akken out of the loop just to make sure it is not the problem.
Had the body shop fix the booboo on the bed and they took it ( the Bed ) off fixed the bed and put back on and then drove it to a spray on bed linner shop to finish the job... ... truck started and then died at the spray on shop when they went to move it. Cranks and cranks but will not fire,
Codes : 0628 fuel pump relay ciricut low
0335 crankshaft position sensor circuit
0036 crankshaft position sensor performance
2269 water in fuel condition
After thinking about it and looking at the codes could it be a fuse ?
They called and I went down and read the codes and drained a little fuel from the filter there seems to be fuel there, then they wanted to close. Tomorrow I'll try to get it going. . Anything else I should be looking at ?
I did a search and am sort of lost about the lift pump and how to tell if it is working or not ? Thought I would take the Van Akken out of the loop just to make sure it is not the problem.
