2014 2500 Aluminum Wheels

[EDankievitch]

The local dealer got in a 2014 for a special order for someone. I got to checkout the truck. The new chassie and suspension was neat but what really stood out were the 18" wheels:--). They were really nice spoke design that the spokes split on their way away from the hub. Also the center cap was really nice. I should have taken a pic as I can't find the wheels anywhere. The dealer has no info about them. The build sheet has a part number that does not come up, it's a ram part number just not in the system. Anyone have any info on these new wheels? I would really like to get a set for my 2013.

 

[Joseph Donnelly]

18x8 forged aluminum wheels are available or standard on 2013 3500 SRW. I am not aware of 18" on 2500s.

 

[BILLUA]

Pics or it didn't happen... .

 

[firefighter_2000]

#ad




This them?

 

[EDankievitch]

Yup, That's them... Ok So I'm not nuts they really do exist. Have a part number?

 

[firefighter_2000]

Nope. I just did a google image search and found them a little farther down.

 

[Joseph Donnelly]

Those wheels look like the standard Laramie 3500 wheels in 2013.

 

[goodguys75]

The local dealer got in a 2014 for a special order for someone. I got to checkout the truck. The new chassie and suspension was neat but what really stood out were the 18" wheels:--). They were really nice spoke design that the spokes split on their way away from the hub. Also the center cap was really nice. I should have taken a pic as I can't find the wheels anywhere. The dealer has no info about them. The build sheet has a part number that does not come up, it's a ram part number just not in the system. Anyone have any info on these new wheels? I would really like to get a set for my 2013.

just buy something similar that is aftermarket... it would be way cheaper... . unless you just have to have them

 

[TCDiesel]

Pic... ... ... .....

 

[EDankievitch]

Any one have a set of take off's? I really like the look and I'm thinkin about keeping this truck as stock as much as I can...

 

[EDankievitch]

Pic... ... ... .....

Anyone have a part number for these wheels? Or have a set they want to sell?

 

[Bob4x4]

Had a 14 2500 on 18's show up. Forgot all about this thread.

 

[GReed]

Give Dave Smith Motors, or some of the other high volume dealers a call. They may have some factory take-offs. Shipping may be a killer unless you find some nearby.

 

[EDankievitch]

I got the build sheet with the part number of the wheels from the truck that I saw with those wheels the part number does not come up when put in the dealer's parts computer. Now why would Ram tease me with a wheel I can't find in their system... lol

 

[rscurtis]

Ed, maybe the system is telling you to purchase another new truck.

 

[mwilson]

I got the build sheet with the part number of the wheels from the truck that I saw with those wheels the part number does not come up when put in the dealer's parts computer. Now why would Ram tease me with a wheel I can't find in their system... lol

Ed,

If this works like Daimler then what has happened is the part number shown is either a production part number (as opposed to a replacement part) or simply has not been priced in the system yet as there as not been a call for it.

Your dealer should be able to submit a request for pricing (again if this works like Daimler).

Mike.

 

[Vaughn MacKenzie]

Anyone seen 20" wheels? According to the article on the TDR home page the 2014s are to have a 20" option too.

 

[Bob4x4]

I got the build sheet with the part number of the wheels from the truck that I saw with those wheels the part number does not come up when put in the dealer's parts computer. Now why would Ram tease me with a wheel I can't find in their system... lol

Build sheets do not have part #s only option codes. The Parts dept should be able to enter the trucks vin and it should filter out the parts that are not used on the truck

 

[EDankievitch]

So after all this, thread that is, the wheels will not fit over my free wheel hubs the center's would have to be machined open... .